Experimental assessment of the Ru–Al–Ni ternary phase diagram at 1000 and 1100° C. Materials Science and Engineering: A. 430:266–276.. 2006.
Experimental investigation and thermodynamic modeling of the Co-rich region in the Co-Al-Ni-W quaternary system. Journal of Phase Equilibria and Diffusion. 35:595–611.. 2014.
Experimental investigation and thermodynamic modelling of the Mg–Al-rich region of the Mg–Al–Sr System. Zeitschrift für Metallkunde. 97:422–428.. 2006.
Experimental investigation and thermodynamic modelling of the Mg–Al-rich region of the Mg–Al–Sr System. International Journal of Materials Research. 97:422-428.. 2022.
Failure by shear during plane strain stretching of a duplex steel. TMS (The Metallurgical Society) Paper Selection;(USA). 56. 1984.
Fatigue deformation in a polycrystalline nickel base superalloy at intermediate and high temperature: Competing failure modes. Acta Materialia. 152:16–33.. 2018.
The feedback loop between theory, simulation and experiment for plasticity and property modeling. Current Opinion in Solid State and Materials Science. 17:10–18.. 2013.
Femtosecond laser ablation and nanoparticle formation in intermetallic NiAl. Applied Surface Science. 353:700–707.. 2015.
Femtosecond laser ablation regimes in a single-crystal superalloy. Metallurgical and Materials Transactions A. 38:2349–2357.. 2007.
Femtosecond Laser Damage in Metals and Semiconductors During TriBeam Tomography. Microsc. Microanal. 22:3.. 2016.
Femtosecond laser machining of cooling holes in thermal barrier coated CMSX4 superalloy. Journal of Materials Processing Technology. 209:5661–5668.. 2009.
Femtosecond laser machining of single-crystal superalloys through thermal barrier coatings. Materials Science and Engineering: A. 430:203–207.. 2006.
Femtosecond laser micromachining of a single-crystal superalloy. Scripta materialia. 53:511–516.. 2005.
Femtosecond laser rejuvenation of nanocrystalline metals. Acta Materialia. 156:183–195.. 2018.
Femtosecond Laser Tomography Using the TriBeam System. Microscopy and Microanalysis. 19:698–699.. 2013.
Femtosecond pulsed laser ablation dynamics and ablation morphology of nickel based superalloy CMSX-4. Journal of Applied Physics. 103:093111.. 2008.
Femtosecond pulsed laser damage characteristics of 7% Y2O3-ZrO2 thermal barrier coating. Applied Physics A. 91:421–428.. 2008.
A First Principles Study of the Effect of Ti and Ta on the SFE of the registered' Phase of Co-based Superalloys. AIP Conference Proceedings.. 2012.
A first-principles study of the effect of Ta on the superlattice intrinsic stacking fault energy of L1 2-Co 3 (Al, W). Intermetallics. 28:138–143.. 2012.
Flow localization during plane strain punch stretching of a ferrite-austenite steel. Metallurgical Transactions A. 17:1537–1546.. 1986.
Flow stress anomalies in $\gamma$/$\gamma$′ two-phase Co–Al–W-base alloys. Scripta Materialia. 56:385–388.. 2007.
Fluid flow and defect formation in the three-dimensional dendritic structure of nickel-based single crystals. Metallurgical and Materials Transactions A. 43:369–380.. 2012.
Foreword: “Eurosuperalloys 2022”. Metallurgical and Materials Transactions A. 54. 2023.
Formation of secondary reaction zone in ruthenium bearing nickel based single crystal superalloys with diffusion aluminide coatings. Materials Science and Technology. 25:300–308.. 2009.