Publications
Export 40 results:
Author Title Type [ Year
] Filters: First Letter Of Title is D [Clear All Filters]
.
2020. Design of Nickel-Cobalt-Ruthenium Multi-Principal Element Alloys. Acta Materialia. :16013.
.
2020. Direct measurements of slip irreversibility in a nickel-based superalloy using high resolution digital image correlation. Acta Materialia. 186:172–189.
.
2019. Dislocation dynamics in a nickel-based superalloy via in-situ transmission scanning electron microscopy. Acta Materialia. 168:152–166.
.
2018. Defects and 3D structural inhomogeneity in electron beam additively manufactured Inconel 718. Materials Characterization. 143:171–181.
.
2018. Designing nickel base alloys for microstructural stability through low γ-γ′ interfacial energy and lattice misfit. Materials and Design. 140:249–256.
.
2018. Discrete dislocation plasticity analysis of the high-temperature cyclic response of composites. Materials Science and Engineering: A. 712:714–719.
.
2017. Discrete dislocation plasticity analysis of the effect of interfacial diffusion on the creep response of Ni single-crystal superalloys. Acta Materialia. 135:188–200.
.
2016. Detecting Recrystallization in a Single Crystal Ni-Base Alloy using Resonant Ultrasound Spectroscopy. NDT & E International.
.
2015. Determination of Surface Topography from Laser Ablation using EBSD. Microscopy and Microanalysis. 21:2369–2370.
.
2015. Dislocation injection in strontium titanate by femtosecond laser pulses. Journal of Applied Physics. 118:075901.
.
2015. Dynamic response of thin films on substrates subjected to femtosecond laser pulses. Acta Materialia. 84:136–144.
.
2012. The dependence of creep behavior on elemental partitioning in Mg-5Al-3Ca-xSn alloys. Metallurgical and Materials Transactions A. 43:3120–3134.
.
2011. Development of dendritic structure in the liquid-metal-cooled, directional-solidification process. Metallurgical and Materials Transactions A. 42:2723–2732.
.
2010. Deformation and strain storage mechanisms during high-temperature compression of a powder metallurgy nickel-base superalloy. Metallurgical and Materials Transactions A. 41:2002–2009.
.
2008. Depth-profiling study of a thermal barrier coated superalloy using femtosecond laser-induced breakdown spectroscopy. Spectrochimica Acta Part B: Atomic Spectroscopy. 63:27–36.
.
2008. Detection of a marker layer in a 7YSZ thermal barrier coating by femtosecond laser-induced breakdown spectroscopy. Surface and Coatings Technology. 202:3940–3946.
.
2008. Dislocation substructures of three die-cast Mg–Al–Ca-based alloys. Scripta Materialia. 58:914–917.
.
2007. Deformation mechanisms in a Ru–Ni–Al ternary B2 intermetallic alloy. Acta materialia. 55:2715–2727.
.
2007. Development of $\gamma$ phase stacking faults during high temperature creep of Ru-containing single crystal superalloys. Acta Materialia. 55:5802–5812.
.
2007. Dynamics of Ultrafast Laser Induced Damage in Single Crystal Ni-Based Superalloy During Machining. Advanced Intermetallic-Based Alloys(MRS Symposium Proceedings Series Volume 980). 980:571–576.
.
2006. Dynamics of Ultrafast Laser Induced Damage in Single Crystal Ni-Based Superalloy During Machining. MRS Proceedings. 980:0980–II05.
.
2004. Deformation of Ru–Al–Ta ternary alloys. Intermetallics. 12:755–762.
.
2004. Development of ultrasonic fatigue for rapid, high temperature fatigue studies in turbine engine materials. 10th International Symposium on Superalloys, Champion, PA, September. :19–23.