Publications
] .
2001. On the effect of low and high pressure hydrogen charging on the oxidation of a Ti–48Al–2Cr–2Nb alloy. Materials Science and Engineering: A. 318:224–234.
.
2014. Effect of Microstructure on Deformation and Fracture of Thixomolded and Thermomechanically Processed AZ61. Magnesium Technology 2014. :161–166.
.
2014. The effect of processing conditions on heat transfer during directional solidification via the Bridgman and liquid metal cooling processes. Metallurgical and materials transactions A. 45:411–425.
.
2007. Effect of Sr additions on the microstructure and strength of a Mg-Al-Ca ternary alloy. Metallurgical and Materials Transactions A. 38:420–427.
.
2014. Effective Hf-Pd Co-doped $\beta$-NiAl (Cr) coatings for single-crystal superalloys. Acta Materialia. 76:449–462.
.
1996. Effects of environment on the tensile and creep behavior of a low-oxygen orthorhombic-based titanium aluminide, Ti-22 Al-23 Nb. Titanium'95- Science and technology. :396–403.
.
1996. Effects of high temperature air and vacuum exposures on the room temperature tensile behavior of the (O+ B2) titanium aluminide Ti-22Al-23Nb. Materials Science and Engineering: A. 208:188–202.
.
2018. Elastic Properties of Novel Co- and CoNi-Based Superalloys Determined through Bayesian Inference and Resonant Ultrasound Spectroscopy. Metallurgical and Materials Transactions A. 49A:2324–2339.
.
2017. Electrically pumped continuous wave quantum dot lasers epitaxially grown on patterned, on-Axis (001) Si. Optics Express. 25:3927–3934.
.
2021. Electron backscattered diffraction using a new monolithic direct detector: High resolution and fast acquisition. Ultramicroscopy. 220:113160.
.
1997. Element partitioning during coarsening of ($\gamma$- $\gamma$′) Ni-Al-Mo alloys. Metallurgical and Materials Transactions A. 28:1943–1945.
.
1997. Element partitioning during coarsening of ($\{$gamma$\}$$\{$minus$\}$$\{$gamma$\}$$\{$prime$\}$) Ni-Al-Mo alloys. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science. 28
.
2010. Elemental partitioning and microstructure of Mg-Al-Ca-Sn quaternary alloys. TMS 2010: Aluminium and Magnesium (TMS 14 February 2010 to 18 February 2010). :1–5.
.
2007. Elemental partitioning in Ru-containing nickel-base single crystal superalloys. Materials Science and Engineering: A. 457:292–299.
.
2010. Elemental partitioning of platinum group metal containing Ni-base superalloys using electron microprobe analysis and atom probe tomography. Acta Materialia. 58:1952–1962.
.
2003. Elevated temperature deformation and dynamic strain aging in polycrystalline RuAl alloys. Intermetallics. 11:1029–1038.
.
2014. Emerging science and research opportunities for metals and metallic nanostructures. Jom. 66:1321–1341.
.
2014. Energetics and nucleation of point defects in aluminum under extreme tensile hydrostatic stresses. Physical Review B. 89:014108.
.
2015. Enhanced plasticity via kinking in cubic metallic nanolaminates. Advanced Engineering Materials. 17:781–785.
.
2012. Enhanced thermoelectric properties of bulk TiNiSn via formation of a TiNi2Sn second phase. Applied Physics Letters. 101:183902.
.
2016. Enhancement of thermoelectric properties in the Nb–Co–Sn half-Heusler/Heusler system through spontaneous inclusion of a coherent second phase. Journal of Applied Physics. 120:075104.
.
2018. Enhancing thermoelectric properties through control of Nickel Interstitials and phase separation in Heusler/Half-Heusler TiNi1.1Sn composites. Materials. 11:1–12.
.
1999. Evolution of substructures in deformed NiAl single crystals oriented for single slip. Philosophical Magazine A. 79:1555–1566.
.
2019. The evolving landscape for alloy design. MRS Bulletin. 44:238–246.
.
2016. Exchange bias and spin glass behavior in biphasic NiFe 2 O 4/NiO thin films. Journal of Magnetism and Magnetic Materials.