Publications
] .
1999. Displacement Mapping During In-Situ Straining In The SEM. MICROSCOPY AND MICROANALYSIS-NEW YORK-. 5:334–335.
.
2004. Dynamic deformation and damage in cast $\gamma$-TiAl during taylor cylinder impact: Experiments and model validation. Metallurgical and Materials Transactions A. 35:2557–2566.
.
1997. Early stages of precipitate rafting in a single crystal Ni Al Mo model alloy investigated by small-angle X-ray scattering and TEM. Acta materialia. 45:1085–1097.
.
1994. The effect of impurity content on thermally activated deformation in NiAl single crystals. Scripta metallurgica et materialia. 31:397–402.
.
2001. On the effect of low and high pressure hydrogen charging on the oxidation of a Ti–48Al–2Cr–2Nb alloy. Materials Science and Engineering: A. 318:224–234.
.
2014. Effect of Microstructure on Deformation and Fracture of Thixomolded and Thermomechanically Processed AZ61. Magnesium Technology 2014. :161–166.
.
2007. Effect of Sr additions on the microstructure and strength of a Mg-Al-Ca ternary alloy. Metallurgical and Materials Transactions A. 38:420–427.
.
1997. Element partitioning during coarsening of ($\gamma$- $\gamma$′) Ni-Al-Mo alloys. Metallurgical and Materials Transactions A. 28:1943–1945.
.
1997. Element partitioning during coarsening of ($\{$gamma$\}$$\{$minus$\}$$\{$gamma$\}$$\{$prime$\}$) Ni-Al-Mo alloys. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science. 28
.
2007. Elemental partitioning in Ru-containing nickel-base single crystal superalloys. Materials Science and Engineering: A. 457:292–299.
.
2010. Elemental partitioning of platinum group metal containing Ni-base superalloys using electron microprobe analysis and atom probe tomography. Acta Materialia. 58:1952–1962.
.
2003. Elevated temperature deformation and dynamic strain aging in polycrystalline RuAl alloys. Intermetallics. 11:1029–1038.
.
1999. Evolution of substructures in deformed NiAl single crystals oriented for single slip. Philosophical Magazine A. 79:1555–1566.
.
2006. Experimental assessment of the Ru–Al–Ni ternary phase diagram at 1000 and 1100° C. Materials Science and Engineering: A. 430:266–276.
.
2014. Experimental investigation and thermodynamic modeling of the Co-rich region in the Co-Al-Ni-W quaternary system. Journal of Phase Equilibria and Diffusion. 35:595–611.
.
1984. Failure by shear during plane strain stretching of a duplex steel. TMS (The Metallurgical Society) Paper Selection;(USA). 56
.
2007. Femtosecond laser ablation regimes in a single-crystal superalloy. Metallurgical and Materials Transactions A. 38:2349–2357.
.
2016. Femtosecond Laser Damage in Metals and Semiconductors During TriBeam Tomography. Microsc. Microanal. 22:3.
.
2006. Femtosecond laser machining of single-crystal superalloys through thermal barrier coatings. Materials Science and Engineering: A. 430:203–207.
.
2005. Femtosecond laser micromachining of a single-crystal superalloy. Scripta materialia. 53:511–516.
.
2013. Femtosecond Laser Tomography Using the TriBeam System. Microscopy and Microanalysis. 19:698–699.
.
2008. Femtosecond pulsed laser damage characteristics of 7% Y2O3-ZrO2 thermal barrier coating. Applied Physics A. 91:421–428.
.
2012. Fluid flow and defect formation in the three-dimensional dendritic structure of nickel-based single crystals. Metallurgical and Materials Transactions A. 43:369–380.
.
2009. Formation of secondary reaction zone in ruthenium bearing nickel based single crystal superalloys with diffusion aluminide coatings. Materials Science and Technology. 25:300–308.