Publications
Export 39 results:
[ Author
] Title Type Year Filters: First Letter Of Last Name is S [Clear All Filters]
.
2015. L12-Strengthened Cobalt-Base Superalloys. Annual Review of Materials Research. 45:345–368.
.
2007. Flow stress anomalies in $\gamma$/$\gamma$′ two-phase Co–Al–W-base alloys. Scripta Materialia. 56:385–388.
.
2014. Oxide-assisted crack growth in hold-time low-cycle-fatigue of single-crystal superalloys. MATEC Web of Conferences. 14:04004.
.
2008. High-temperature strength and deformation of $\gamma$/$\gamma$′ two-phase Co–Al–W-base alloys. Acta Materialia. 56:1288–1297.
.
2006. High Temperature Strength of Co-based $\gamma$/$\gamma$'Superalloys. MRS Proceedings. 980:0980–II08.
.
2010. Crack progression during sustained-peak low-cycle fatigue in single-crystal Ni-base superalloy René N5. Metallurgical and Materials Transactions A. 41:947–956.
.
2008. Precipitation strengthening of a Mg-Al-Ca–based AXJ530 die-cast alloy. Metallurgical and Materials Transactions A. 39:696–702.
.
2004. Structure and transition of eutectic (Mg, Al) 2 Ca Laves phase in a die-cast Mg–Al–Ca base alloy. Scripta Materialia. 51:1005–1010.
.
2007. High Temperature Strength of Co-based gamma/gamma' Superalloys. Advanced Intermetallic-Based Alloys(MRS Symposium Proceedings Series Volume 980). 980:499–504.
.
2006. Phase equilibria in the Mg-Al-Ca ternary system at 773 and 673 K. Metallurgical and Materials Transactions A. 37:975–983.
.
2005. Phase Transformation and Creep of Mg-Al-Ca Based Die-Cast Alloys. Essential Readings in Magnesium Technology. :291–296.
.
2005. Solidification paths and eutectic intermetallic phases in Mg–Al–Ca ternary alloys. Acta Materialia. 53:2823–2834.
.
2007. Effect of Sr additions on the microstructure and strength of a Mg-Al-Ca ternary alloy. Metallurgical and Materials Transactions A. 38:420–427.
.
2016. A combined grain scale elastic–plastic criterion for identification of fatigue crack initiation sites in a twin containing polycrystalline nickel-base superalloy. Acta Materialia. 103:461–473.
.
2017. Microstructural Statistics for Fatigue Crack Initiation in Polycrystalline Nickel-base Superalloys. International Journal of Fracture. 208(1-2):240.
.
2016. Sub-grain scale digital image correlation by electron microscopy for polycrystalline materials during elastic and plastic deformation. Experimental Mechanics. 56:197–216.
.
2017. Measurement of Strain Localization Resulting from Monotonic and Cyclic Loading at 650 ∘C in Nickel Base Superalloys. Experimental Mechanics. 57:1289–1309.
.
2015. High resolution mapping of strain localization near twin boundaries in a nickel-based superalloy. Acta Materialia. 98:29–42.
.
2015. Transverse creep of nickel-base superalloy bicrystals. Metallurgical and Materials Transactions A. 46:2516–2529.
.
2014. Creep behavior under isothermal and non-isothermal conditions of AM3 single crystal superalloy for different solutioning cooling rates. Materials Science and Engineering: A. 601:145–152.
.
2015. Benefits of high gradient solidification for creep and low cycle fatigue of AM1 single crystal superalloy. Materials Science and Engineering: A. 645:109–115.
.
2001. DYNAMIC DEFORMATION AND DAMAGE IN CAST Y-TIAL DURING TAYLOR CYLINDER IMPACT: EXPERIMENTS AND MODEL VALIDATION. Structural Intermetallics, 2001: ISSI: Proceedings of the Third International Symposium on Structural Intermetallics. 1:269.
.
1997. Surface damage due to impact and fatigue strength reduction in gamma titanium aluminides. Minerals, Metals and Materials Society/AIME(USA),. :435–442.
.
2001. The role of impact damage and fatigue strength reduction in gamma titanium aluminide alloys. Structural Intermetallics. :259–268.