Publications
] "Optical measurement of thermal contact conductance between wafer-like thin solid samples." JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME 121 (1999): 954-963.
"Recent advances in oxide-oxide composite technology." ADVANCED COMPOSITE MATERIALS 8 (1999): 17-23.
"Experimental assessment of fatigue life and failure modes in a SiCc/Ti composite." COMPOSITES SCIENCE AND TECHNOLOGY 58 (1998): 1583-1591.
"Limit stress conditions for weakly bonded fiber composites subject to transverse biaxial tensile loading." INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES 35 (1998): 2821-2842.
"Processing and performance of an all-oxide ceramic composite." JOURNAL OF THE AMERICAN CERAMIC SOCIETY 81 (1998): 2077-2086.
"Stress rupture of an enhanced nicalon/silicon carbide composite at intermediate temperatures." JOURNAL OF THE AMERICAN CERAMIC SOCIETY 81 (1998): 2140-2146.
"Application of weakest-link fracture statistics to fiber-reinforced ceramic-matrix composites." JOURNAL OF THE AMERICAN CERAMIC SOCIETY 80 (1997): 1535-1543.
"Delamination resistance of two hybrid ceramic-composite laminates." JOURNAL OF THE AMERICAN CERAMIC SOCIETY 80 (1997): 3029-3037.
"Effect of notch root radius on the initiation toughness of a C-fiber/SiC-matrix composite." SCRIPTA MATERIALIA 38 (1997): 15-19.
"Inelastic deformation of fiber composites containing bridged cracks." MECHANICS OF MATERIALS 26 (1997): 81-92.
"Measurement of the cyclic bridging law in a titanium matrix composite and its application to simulating crack growth." ACTA MATERIALIA 45 (1997): 5203-5211.
"Role of cladding in the notched tensile properties of a titanium matrix composite." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 28 (1997): 2731-2740.
"Strength variability in alumina fiber-reinforced aluminum matrix composites." ACTA MATERIALIA 45 (1997): 4603-4613.
"Strength-limited design of composite/monolith transitions in metallic structures." COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING 28 (1997): 399-407.
"Advances in ceramic composites reinforced by continuous fibers." CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE 1 (1996): 666-673.
"The effects of a single mode III loading cycle on mode I crack initiation and growth toughnesses in a cross-ply [90 degrees/0 degrees](2s) Ti-6Al-4V/SiCf composite." JOURNAL OF COMPOSITE MATERIALS 30 (1996): 1858-1872.
"Effects of cladding on the tensile properties of titanium matrix composites." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 214 (1996): 62-67.
"Effects of notch root radius on crack initiation and growth toughnesses of a cross-ply Ti-6Al-4V/SiC composite." ACTA MATERIALIA 44 (1996): 1831-1838.
"High temperature deformation and fracture of a fiber reinforced titanium matrix composite." ACTA MATERIALIA 44 (1996): 683-695.
"Influence of thermal expansion mismatch on residual stresses and flow response of microballoon composites." MECHANICS OF MATERIALS 23 (1996): 133-146.
"Mechanical behavior of several hybrid ceramic-matrix-composite laminates." JOURNAL OF THE AMERICAN CERAMIC SOCIETY 79 (1996): 1825-1833.
"A method for measuring residual strains in fiber-reinforced titanium matrix composites." ACTA MATERIALIA 44 (1996): 3397-3406.
"Models of high-temperature, environmentally assisted embrittlement in ceramic-matrix composites." JOURNAL OF THE AMERICAN CERAMIC SOCIETY 79 (1996): 2345-2352.
"Multiple matrix cracking in a fiber-reinforced titanium matrix composite under high-cycle fatigue." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 27 (1996): 1899-1907.
"Plastic flow and fracture of a particulate metal matrix composite." ACTA MATERIALIA 44 (1996): 3465-3476.