Publications
"Phase topology and morphology of co-continuous tungsten‑copper composites." Materials Characterization 231 (2026): 115921.
"Phase topology and morphology of co-continuous tungsten‑copper composites." Materials Characterization 231 (2026): 115921.
"Direct electron detection for EBSD of low symmetry & beam sensitive ceramics." Ultramicroscopy 268 (2025): 114079.
"Exploring the Influence of Composition and Microstructure on High-Strain-Rate Properties in Fe-Cu Alloys Made by Laser Powder Bed Fusion." JOM 77 (2025): 9318-9329.
"Simulating effects of microstructure on the mechanical response of flexible foams." Journal of Materials Research 40 (2025): 2323-2336.
"Influence of BN microstructure on oxidation of SiC/BN/SiC composites." Journal of the American Ceramic Society 2024; e20230. (2024).
"Protocol for selecting exemplary silicate deposit compositions for evaluating thermal and environmental barrier coatings." Journal of the American Ceramic Society (2022).
(4.17 MB)
"Tough multimaterial interfaces through wavelength-selective 3D printing." ACS Applied Materials & Interfaces 13 (2021): 22065-22072.
"Damping in cellular structures made from composite struts and walls with elastic and viscoelastic phases." Journal of the Mechanics and Physics of Solids 145 (2020): 104106.
"Reactions of molten silicate deposits with yttrium monosilicate." JOURNAL OF THE AMERICAN CERAMIC SOCIETY 103 (2020): 2919-2932.
"Interaction of yttrium disilicate environmental barrier coatings with calcium-magnesium-iron alumino-silicate melts." Acta Materialia 145 (2018): 451-461.
"Roles of composition and temperature in silicate deposit-induced recession of yttrium disilicate." Acta Materialia 160 (2018): 34-46.
"Roles of composition and temperature in silicate deposit-induced recession of yttrium disilicate." Acta Materialia 160 (2018): 34-46.
"Solution Mask Liquid Lithography (SMaLL) for One-Step, Multimaterial 3D Printing." ADVANCED MATERIALS 30 (2018): 1800364.
"Insight into 3D micro-CT data: exploring segmentation algorithms through performance metrics." Journal of Synchrotron Radiation 24 (2017): 1065-1077.
"Insight into 3D micro-CT data: exploring segmentation algorithms through performance metrics." Journal of Synchrotron Radiation 24 (2017): 1065-1077.
"Insight into 3D micro-CT data: exploring segmentation algorithms through performance metrics." Journal of Synchrotron Radiation 24 (2017): 1065-1077.
"Intermediate temperature oxidative strength degradation of a SiC/SiNC composite with a polymer-derived matrix." JOURNAL OF THE AMERICAN CERAMIC SOCIETY 100 (2017): 1606-1617.
"Intermediate temperature oxidative strength degradation of a SiC/SiNC composite with a polymer-derived matrix." Journal of the American Ceramic Society 100 (2017): 1606-1617.
"Intermediate Temperature Internal Oxidation of a SiC/SiCN Composite with a Polymer-Derived Matrix." JOURNAL OF THE AMERICAN CERAMIC SOCIETY 99 (2016): 3120-3128.
"Calibration procedures for a computational model of ductile fracture." ENGINEERING FRACTURE MECHANICS 77 (2010): 492-509.
"The tissue diagnostic instrument." REVIEW OF SCIENTIFIC INSTRUMENTS 80 (2009): 054303.
"The tissue diagnostic instrument." REVIEW OF SCIENTIFIC INSTRUMENTS 80 (2009): 054303.
"The tissue diagnostic instrument." REVIEW OF SCIENTIFIC INSTRUMENTS 80 (2009): 054303.
"The tissue diagnostic instrument." REVIEW OF SCIENTIFIC INSTRUMENTS 80 (2009): 054303.

]