Publications
Microstructure and Texture Through Thixomolding and Thermomechanical Processing and the Role of Mg17Al12 Particles. Metallurgical and Materials Transactions A. 47:3125–3136.
.
2016. Prediction of the plastic anisotropy of magnesium alloys with synthetic textures and implications for the effect of texture on formability. Materials Science and Engineering: A. 675:345–360.
.
2016. Texture, Second-Phase Particles, and the Anisotropy of Deformation Behavior in TTMP AZ61. Metallurgical and Materials Transactions A. 46:2986–2998.
.
2015. The dependence of creep behavior on elemental partitioning in Mg-5Al-3Ca-xSn alloys. Metallurgical and Materials Transactions A. 43:3120–3134.
.
2012. .
2012. Creep and Elemental Partitioning Behavior of Mg-Al-Ca-Sn Alloys with the Addition of Sr. Magnesium Technology 2011. :215–222.
.
2011. In situ damage assessment in a cast magnesium alloy during very high cycle fatigue. Scripta Materialia. 64:65–68.
.
2011. In situ characterization of fatigue damage evolution in a cast Al alloy via nonlinear ultrasonic measurements. Acta Materialia. 58:2143–2154.
.
2010. Partitioning of Solute to the Primary $\alpha$-Mg Phase in Creep-Resistant Mg-Al-Ca–Based Cast Alloys. Metallurgical and Materials Transactions A. 41:2435–2442.
.
2010. Crystallographic fatigue crack initiation in nickel-based superalloy René 88DT at elevated temperature. Acta Materialia. 57:5964–5974.
.
2009. Nonlinear ultrasonics for in situ damage detection during high frequency fatigue. Journal of Applied Physics. 106:024904.
.
2009. In Situ Imaging of High Cycle Fatigue Crack Growth in Single Crystal Nickel-Base Superalloys by Synchrotron X-Radiation. Ann Arbor. 1001:48109.
.
2008. In situ imaging of high cycle fatigue crack growth in single crystal nickel-base superalloys by synchrotron X-radiation. Journal of Engineering Materials and Technology. 130:021008.
.
2008. Mapping single-crystal dendritic microstructure and defects in nickel-base superalloys with synchrotron radiation. Acta Materialia. 56:4715–4723.
.
2008. .
2007.
Small fatigue crack growth in metallic materials: a model and its application to engineering alloys. Acta Materialia. 55:6606–6616.
.
2007. Experimental investigation and thermodynamic modelling of the Mg–Al-rich region of the Mg–Al–Sr System. Zeitschrift für Metallkunde. 97:422–428.
.
2006. Microstructure and properties of blended Mg- Al alloys fabricated by semisolid processing. Metallurgical and Materials Transactions A. 37:3725–3736.
.
2006. Phase equilibria in the Mg-Al-Ca ternary system at 773 and 673 K. Metallurgical and Materials Transactions A. 37:975–983.
.
2006. Phase Transformation and Creep of Mg-Al-Ca Based Die-Cast Alloys. Essential Readings in Magnesium Technology. :291–296.
.
2005. Room temperature fatigue response of $\gamma$-TiAl to impact damage. Scripta materialia. 40:445–449.
.
1999.