Publications
] .
2011. In situ damage assessment in a cast magnesium alloy during very high cycle fatigue. Scripta Materialia. 64:65–68.
.
2011. In situ synchrotron X-ray imaging of high-cycle fatigue crack propagation in single-crystal nickel-base alloys. Acta Materialia. 59:5103–5115.
.
2011. Mapping of femtosecond laser-induced collateral damage by electron backscatter diffraction. Journal of Applied Physics. 110:083114.
.
2011. Microstructure Evolution in AZ61L During TTMP and Subsequent Annealing Treatments. Magnesium Technology 2011. :599–603.
.
2011. A New Femtosecond Laser-Based Tomography Technique for Multiphase Materials. Advanced Materials. 23:2339–2342.
.
2011. Oxide-Assisted Degradation of Ni-Base Single Crystals During Cyclic Loading: the Role of Coatings. Journal of the American Ceramic Society. 94
.
2011. Single-crystal solidification of new Co–Al–W-base alloys. Intermetallics. 19:636–643.
.
2011. The Tri-Beam System: Femtosecond Laser Based Tomography in a Dual-Beam FIB. Microscopy and Microanalysis. 17:958–959.
.
2010. Crack progression during sustained-peak low-cycle fatigue in single-crystal Ni-base superalloy René N5. Metallurgical and Materials Transactions A. 41:947–956.
.
2010. Deformation and strain storage mechanisms during high-temperature compression of a powder metallurgy nickel-base superalloy. Metallurgical and Materials Transactions A. 41:2002–2009.
.
2010. Elemental partitioning and microstructure of Mg-Al-Ca-Sn quaternary alloys. TMS 2010: Aluminium and Magnesium (TMS 14 February 2010 to 18 February 2010). :1–5.
.
2010. Elemental partitioning of platinum group metal containing Ni-base superalloys using electron microprobe analysis and atom probe tomography. Acta Materialia. 58:1952–1962.
.
2010. Grain-scale creep processes in Mg–Al–Ca base alloys: Implications for alloy design. Scripta Materialia. 63:692–697.
.
2010. High-Temperature Cyclic Oxidation of Pd/Pt-Modified Nial Bond Coats. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.[np]. 14-18 Feb.
.
2010. In situ characterization of fatigue damage evolution in a cast Al alloy via nonlinear ultrasonic measurements. Acta Materialia. 58:2143–2154.
.
2010. On Mechanical Properties and Microstructures of TTMP Wrought Mg Alloys. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.[np]. 14-18 Feb.
.
2010. Modeling fluid flow in three-dimensional single crystal dendritic structures. Acta Materialia. 58:2864–2875.
.
2010. New Co-based g-g′ high-temperature alloys. JOM. 62:58–63.
.
2010. Partitioning of Solute to the Primary $\alpha$-Mg Phase in Creep-Resistant Mg-Al-Ca–Based Cast Alloys. Metallurgical and Materials Transactions A. 41:2435–2442.
.
2010. Permeability Determination via 3 D Reconstruction of the Mushy Zone of Nickel-Base Single Cyrstals. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.[np]. 14-18 Feb.
.
2010. Pulsed-terahertz reflectometry for health monitoring of ceramic thermal barrier coatings. Optics express. 18:3477–3486.
.
2010. Real Time Synchrotron Radiography of High Temperature High Cycle Fatigue Crack Growth in Single-Crystal Nickel-Base Superalloys. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.[np]. 14-18 Feb.
.
2010. Weight loss with magnesium alloys. Science. 328:986–987.
.
2009. Crystallographic fatigue crack initiation in nickel-based superalloy René 88DT at elevated temperature. Acta Materialia. 57:5964–5974.