Publications
Discrete dislocation plasticity analysis of the high-temperature cyclic response of composites. Materials Science and Engineering: A. 712:714–719.
.
2018. Dislocation dynamics in a nickel-based superalloy via in-situ transmission scanning electron microscopy. Acta Materialia. 168:152–166.
.
2019. Dislocation injection in strontium titanate by femtosecond laser pulses. Journal of Applied Physics. 118:075901.
.
2015. Dislocation substructures of three die-cast Mg–Al–Ca-based alloys. Scripta Materialia. 58:914–917.
.
2008. Dislocations and high-temperature plastic deformation of superalloy single crystals. Dislocations in solids. 11:547–618.
.
2002. Displacement Mapping During In-Situ Straining In The SEM. MICROSCOPY AND MICROANALYSIS-NEW YORK-. 5:334–335.
.
1999. Dynamic deformation and damage in cast $\gamma$-TiAl during taylor cylinder impact: Experiments and model validation. Metallurgical and Materials Transactions A. 35:2557–2566.
.
2004. Dynamic response of thin films on substrates subjected to femtosecond laser pulses. Acta Materialia. 84:136–144.
.
2015. Early stages of precipitate rafting in a single crystal Ni Al Mo model alloy investigated by small-angle X-ray scattering and TEM. Acta materialia. 45:1085–1097.
.
1997. EBSD Imaging of Femtosecond Laser Ablated Surfaces Using the TriBeam System. Microscopy and Microanalysis. 19:864–865.
.
2013. The effect of aging on the relaxation of residual stress in cast aluminum. Metallurgical and Materials Transactions A. 44:4809–4818.
.
2013. Effect of Boron Concentration on Fatigue Crack Propagation Resistance and Low Cycle Fatigue Properties of Inconel 718, Superalloys 2004, KA Green, H. Harada, TE Howson, TM Pollock, RC Reed, JJ Schirra, and S. Walston, Ed., TMS, Warrendale, PA. :275–281.
.
2004. The effect of impurity content on thermally activated deformation in NiAl single crystals. Scripta metallurgica et materialia. 31:397–402.
.
1994. On the effect of low and high pressure hydrogen charging on the oxidation of a Ti–48Al–2Cr–2Nb alloy. Materials Science and Engineering: A. 318:224–234.
.
2001. Effect of Microstructure on Deformation and Fracture of Thixomolded and Thermomechanically Processed AZ61. Magnesium Technology 2014. :161–166.
.
2014. The effect of processing conditions on heat transfer during directional solidification via the Bridgman and liquid metal cooling processes. Metallurgical and materials transactions A. 45:411–425.
.
2014. Effect of Sr additions on the microstructure and strength of a Mg-Al-Ca ternary alloy. Metallurgical and Materials Transactions A. 38:420–427.
.
2007. Effective Hf-Pd Co-doped $\beta$-NiAl (Cr) coatings for single-crystal superalloys. Acta Materialia. 76:449–462.
.
2014. Effects of environment on the tensile and creep behavior of a low-oxygen orthorhombic-based titanium aluminide, Ti-22 Al-23 Nb. Titanium'95- Science and technology. :396–403.
.
1996. Effects of high temperature air and vacuum exposures on the room temperature tensile behavior of the (O+ B2) titanium aluminide Ti-22Al-23Nb. Materials Science and Engineering: A. 208:188–202.
.
1996. Elastic Properties of Novel Co- and CoNi-Based Superalloys Determined through Bayesian Inference and Resonant Ultrasound Spectroscopy. Metallurgical and Materials Transactions A. 49A:2324–2339.
.
2018. Electrically pumped continuous wave quantum dot lasers epitaxially grown on patterned, on-Axis (001) Si. Optics Express. 25:3927–3934.
.
2017. Electron backscattered diffraction using a new monolithic direct detector: High resolution and fast acquisition. Ultramicroscopy. 220:113160.
.
2021. Element partitioning during coarsening of ($\gamma$- $\gamma$′) Ni-Al-Mo alloys. Metallurgical and Materials Transactions A. 28:1943–1945.
.
1997. Element partitioning during coarsening of ($\{$gamma$\}$$\{$minus$\}$$\{$gamma$\}$$\{$prime$\}$) Ni-Al-Mo alloys. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science. 28
.
1997.