Publications
In situ Femtosecond Laser and Argon Ion Beams for 3D Microanalysis using the TriBeam. Microscopy and Microanalysis. 21:1847–1848.
.
2015. In situ synchrotron X-ray imaging of high-cycle fatigue crack propagation in single-crystal nickel-base alloys. Acta Materialia. 59:5103–5115.
.
2011. Influence of microstructure and strain distribution on failure properties in intermetallic TiAl-based alloys. Materials Science and Engineering: A. 319:613–617.
.
2001. The influence of microstructure on the measurement of $\gamma$-$\gamma$′ lattice mismatch in single-crystal Ni-base superalloys. Materials Science and Engineering: A. 210:8–15.
.
1996. The influence of microstructure on the measurement of yy'lattice mismatch in single-crystal Ni-base superalloys. Materials Science & Engineering A. 1:8–15.
.
1996. Influence of Ru and Cr on the heat-treated microstructure of Ni-based superalloys. Materials science forum. 546:1207–1210.
.
2007. In-situ observations of crack initiation and growth at notches in cast Ti-48Al-2Cr-2Nb. Scripta materialia. 35:1311–1316.
.
1996. Interfacial Dislocation Networks and creep in directional coarsened Ru-containing nickel-base single-crystal superalloys. Metallurgical and Materials Transactions A. 39:1290–1307.
.
2008. The kinetics of low temperature deformation in NiAl single crystals. Proc first int symp struct intermet, TMS, Warrendale, PA. :591–599.
.
1993. Kink band formation in high-strength bulk metallic nanolaminates. Microscopy and Microanalysis. 21:1157–1158.
.
2015. Localized recrystallization during creep in nickel-based superalloys GTD444 and René N5. Acta Materialia. 73:287–297.
.
2014. Low temperature deformation and dislocation substructure of ruthenium aluminide polycrystals. Acta materialia. 47:1035–1042.
.
1999. Low temperature deformation kinetics of ruthenium aluminide alloys. MRS Proceedings. 552:KK7–11.
.
1998. Materials response to glancing incidence femtosecond laser ablation. Acta Materialia. 124:46.
.
2017. Mechanical Behavior of Ternary and Quaternary Rual Alloys. MRS Proceedings. 753:BB2–11.
.
2002. Mechanical Behavior of Ternary and Quaternary RuAl Alloys. MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS. 753:89–96.
.
2003. A mechanism governing oxidation-assisted low-cycle fatigue of superalloys. Acta Materialia. 57:2969–2983.
.
2009. Microstructural characterization of a die-cast magnesium-rare earth alloy. Scripta Materialia. 45:1423–1429.
.
2001. Microstructural evolution and failure characteristics of a NiCoCrAlY bond coat in “hot spot” cyclic oxidation. Acta Materialia. 57:3885–3894.
.
2009. Microstructural observations of as-prepared and thermal cycled NiCoCrAlY bond coats. Surface and Coatings Technology. 201:3918–3925.
.
2006. Microstructural stability and creep of rare-earth containing magnesium alloys. Scripta Materialia. 48:1029–1034.
.
2003. Microstructural Statistics for Fatigue Crack Initiation in Polycrystalline Nickel-base Superalloys. International Journal of Fracture. 208(1-2):240.
.
2017. Microstructure Characterization of Weakly Textured and Fine Grained AZ61 Sheet. Magnesium Technology 2013. :113–118.
.
2013. Microstructure Evolution in AZ61L During TTMP and Subsequent Annealing Treatments. Magnesium Technology 2011. :599–603.
.
2011. Microstructure Modification and Deformation Behavior of Fine-Grained AZ61 Sheet Produced by Thixomolding and Thermomechanical Processing (TTMP). Magnesium Technology 2012. :339–344.
.
2012.