A method for measuring microstructural-scale strains using a scanning electron microscope: applications to $\gamma$-titanium aluminides. Metallurgical and Materials Transactions A. 34:2301–2313.. 2003.
Microstructural stability and creep of rare-earth containing magnesium alloys. Scripta Materialia. 48:1029–1034.. 2003.
Phase instabilities and carbon additions in single-crystal nickel-base superalloys. Materials Science and Engineering: A. 348:111–121.. 2003.
Solidification of high-refractory ruthenium-containing superalloys. Acta Materialia. 51:269–284.. 2003.
Stabilization of thermosolutal convective instabilities in Ni-based single-crystal superalloys: Carbide precipitation and Rayleigh numbers. Metallurgical and Materials Transactions A. 34:1953–1967.. 2003.
Dislocations and high-temperature plastic deformation of superalloy single crystals. Dislocations in solids. 11:547–618.. 2002.
Mechanical Behavior of Ternary and Quaternary Rual Alloys. MRS Proceedings. 753:BB2–11.. 2002.
Strain hardening. Intermetallic Compounds-Principles and Practice: Progress, Volume 3. :361–377.. 2002.
Use of Weibull statistics to quantify property variability in TiAl alloys. Metallurgical and Materials Transactions A. 33:3127–3136.. 2002.
Cast gamma titanium aluminides for low pressure turbine blades: a design case study for intermetallics. Minerals, Metals and Materials Society/AIME, Structural Intermetallics 2001(USA),. :3–12.. 2001.
A comparative analysis of low temperature deformation in B2 aluminides. Materials Science and Engineering: A. 317:241–248.. 2001.
DYNAMIC DEFORMATION AND DAMAGE IN CAST Y-TIAL DURING TAYLOR CYLINDER IMPACT: EXPERIMENTS AND MODEL VALIDATION. Structural Intermetallics, 2001: ISSI: Proceedings of the Third International Symposium on Structural Intermetallics. 1:269.. 2001.
On the effect of low and high pressure hydrogen charging on the oxidation of a Ti–48Al–2Cr–2Nb alloy. Materials Science and Engineering: A. 318:224–234.. 2001.
Influence of microstructure and strain distribution on failure properties in intermetallic TiAl-based alloys. Materials Science and Engineering: A. 319:613–617.. 2001.
Microstructural characterization of a die-cast magnesium-rare earth alloy. Scripta Materialia. 45:1423–1429.. 2001.
The role of impact damage and fatigue strength reduction in gamma titanium aluminide alloys. Structural Intermetallics. :259–268.. 2001.
Special issue-Micromechanics and micromechanisms of deformation and fracture: A special issue in honor of professor Ali S. Argon-Preface.. 2001.
Stabilization of thermosolutal convective instabilities in Ni-based single-crystal superalloys: Carbon additions and freckle formation. Metallurgical and Materials Transactions A. 32:1743–1753.. 2001.
Carbides and grain defect formation in directionally solidified nickel-base superalloys. Advanced Technologies for Superalloy Affordability as held at the 2000 TMS Annual Meeting. :2000.. 2000.
Superalloys 2000. Ninth International Symposium on Superalloys. :2000.. 2000.
Deformation-induced point defects in NiAl single crystals. Intermetallics. 7:1255–1260.. 1999.
Determination of matrix and precipitate elastic constants in ($\gamma$–$\gamma$′) Ni-base model alloys, and their relevance to rafting. Materials Science and Engineering: A. 260:212–221.. 1999.
Development and structure of $\alpha$ 2 plates in $\gamma$-based titanium aluminides due to the $\gamma$ to $\alpha$ transformation on heating. Scripta materialia. 40:899–904.. 1999.
Displacement Mapping During In-Situ Straining In The SEM. MICROSCOPY AND MICROANALYSIS-NEW YORK-. 5:334–335.. 1999.