Predicting freckle formation in single crystal Ni-base superalloys. Journal of materials science. 39:7199–7205.. 2004.
The Re (Ru)-rich $δ$-phase in Ru-containing superalloys. Materials Science and Engineering: A. 373:239–249.. 2004.
Structure and transition of eutectic (Mg, Al) 2 Ca Laves phase in a die-cast Mg–Al–Ca base alloy. Scripta Materialia. 51:1005–1010.. 2004.
Symposium on Dynamic Deformation: Constitutive Modeling, Grain Size, and Other Effects–In Honor of Prof. Ronald W. Armstrong-Dynamic Deformation and Damage in Cast g-TiAl during Taylor Cylinder. Metallurgical and Materials Transactions-Series A. 35:2557–2566.. 2004.
Thermal expansion behavior of ruthenium aluminides. Scripta Materialia. 50:845–848.. 2004.
Transmission electron microscopy study of complex planar faults in Ru–Al–0.5 at.% B. Philosophical Magazine. 84:2317–2329.. 2004.
Defect reduction in large superalloy castings by liquid-tin assisted solidification.. PARSONS 2003: Sixth International Charles Parsons Turbine Conference. :649–661.. 2003.
Deformation of a platinum-containing RuAl intermetallic by< 111> dislocations. Scripta materialia. 48:1087–1092.. 2003.
Elevated temperature deformation and dynamic strain aging in polycrystalline RuAl alloys. Intermetallics. 11:1029–1038.. 2003.
Mechanical Behavior of Ternary and Quaternary RuAl Alloys. MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS. 753:89–96.. 2003.
A method for measuring microstructural-scale strains using a scanning electron microscope: applications to $\gamma$-titanium aluminides. Metallurgical and Materials Transactions A. 34:2301–2313.. 2003.
Microstructural stability and creep of rare-earth containing magnesium alloys. Scripta Materialia. 48:1029–1034.. 2003.
Phase instabilities and carbon additions in single-crystal nickel-base superalloys. Materials Science and Engineering: A. 348:111–121.. 2003.
Solidification of high-refractory ruthenium-containing superalloys. Acta Materialia. 51:269–284.. 2003.
Stabilization of thermosolutal convective instabilities in Ni-based single-crystal superalloys: Carbide precipitation and Rayleigh numbers. Metallurgical and Materials Transactions A. 34:1953–1967.. 2003.
Dislocations and high-temperature plastic deformation of superalloy single crystals. Dislocations in solids. 11:547–618.. 2002.
Mechanical Behavior of Ternary and Quaternary Rual Alloys. MRS Proceedings. 753:BB2–11.. 2002.
Strain hardening. Intermetallic Compounds-Principles and Practice: Progress, Volume 3. :361–377.. 2002.
Use of Weibull statistics to quantify property variability in TiAl alloys. Metallurgical and Materials Transactions A. 33:3127–3136.. 2002.
Cast gamma titanium aluminides for low pressure turbine blades: a design case study for intermetallics. Minerals, Metals and Materials Society/AIME, Structural Intermetallics 2001(USA),. :3–12.. 2001.
A comparative analysis of low temperature deformation in B2 aluminides. Materials Science and Engineering: A. 317:241–248.. 2001.
DYNAMIC DEFORMATION AND DAMAGE IN CAST Y-TIAL DURING TAYLOR CYLINDER IMPACT: EXPERIMENTS AND MODEL VALIDATION. Structural Intermetallics, 2001: ISSI: Proceedings of the Third International Symposium on Structural Intermetallics. 1:269.. 2001.
On the effect of low and high pressure hydrogen charging on the oxidation of a Ti–48Al–2Cr–2Nb alloy. Materials Science and Engineering: A. 318:224–234.. 2001.
Influence of microstructure and strain distribution on failure properties in intermetallic TiAl-based alloys. Materials Science and Engineering: A. 319:613–617.. 2001.
Microstructural characterization of a die-cast magnesium-rare earth alloy. Scripta Materialia. 45:1423–1429.. 2001.