Publications
] .
2019. In-plane and out-of-plane deformation at the sub-grain scale in polycrystalline materials assessed by confocal microscopy. Acta Materialia. 169:260–274.
.
2004. Transmission electron microscopy study of complex planar faults in Ru–Al–0.5 at.% B. Philosophical Magazine. 84:2317–2329.
.
1998. Low temperature deformation kinetics of ruthenium aluminide alloys. MRS Proceedings. 552:KK7–11.
.
1999. Low temperature deformation and dislocation substructure of ruthenium aluminide polycrystals. Acta materialia. 47:1035–1042.
.
2007. Femtosecond laser ablation regimes in a single-crystal superalloy. Metallurgical and Materials Transactions A. 38:2349–2357.
.
2007. Development of $\gamma$ phase stacking faults during high temperature creep of Ru-containing single crystal superalloys. Acta Materialia. 55:5802–5812.
.
2010. Permeability Determination via 3 D Reconstruction of the Mushy Zone of Nickel-Base Single Cyrstals. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.[np]. 14-18 Feb.
.
2012. Fluid flow and defect formation in the three-dimensional dendritic structure of nickel-based single crystals. Metallurgical and Materials Transactions A. 43:369–380.
.
2008. The three-dimensional reconstruction of the dendritic structure at the solid-liquid interface of a Ni-based single crystal. JOM. 60:26–30.
.
2010. Modeling fluid flow in three-dimensional single crystal dendritic structures. Acta Materialia. 58:2864–2875.
.
2017. 3D printing of high-strength aluminium alloys. Nature. 549:365–369.
.
2020. Grain refinement mechanisms in additively manufactured nano-functionalized aluminum. Acta Materialia. 200:1022–1037.
.
2007. Dynamics of Ultrafast Laser Induced Damage in Single Crystal Ni-Based Superalloy During Machining. Advanced Intermetallic-Based Alloys(MRS Symposium Proceedings Series Volume 980). 980:571–576.
.
2006. Dynamics of Ultrafast Laser Induced Damage in Single Crystal Ni-Based Superalloy During Machining. MRS Proceedings. 980:0980–II05.
.
2008. Approaching non-destructive surface chemical analysis of CMSX-4 superalloy with double-pulsed laser induced breakdown spectroscopy. Spectrochimica Acta Part B: Atomic Spectroscopy. 63:561–565.
.
2008. Femtosecond pulsed laser ablation dynamics and ablation morphology of nickel based superalloy CMSX-4. Journal of Applied Physics. 103:093111.
.
2016. Understanding of Inverse Coarsening of $\gamma$'precipitates in Ni-base Superalloys. Microscopy and Microanalysis. 22:1258–1259.
.
2016. Solute partitioning in multi-component $\gamma$/$\gamma$′ Co–Ni-base superalloys with near-zero lattice misfit. Scripta Materialia. 113:185–189.
.
2018. Designing nickel base alloys for microstructural stability through low γ-γ′ interfacial energy and lattice misfit. Materials and Design. 140:249–256.
.
2006. Microstructural observations of as-prepared and thermal cycled NiCoCrAlY bond coats. Surface and Coatings Technology. 201:3918–3925.
.
2011. A comparative investigation of oxide formation on EQ (Equilibrium) and NiCoCrAlY bond coats under stepped thermal cycling. Surface and Coatings Technology. 205:3066–3072.
.
2023. Inducing skyrmion flop transitions in Co 8 Zn 8 Mn 4 at room temperature. Physical Review Materials. 7
.
2012. Microstructural extremes and the transition from fatigue crack initiation to small crack growth in a polycrystalline nickel-base superalloy. Acta Materialia. 60:2840–2854.
.
2009. Crystallographic fatigue crack initiation in nickel-based superalloy René 88DT at elevated temperature. Acta Materialia. 57:5964–5974.
.
2017. Modelling the elastic properties of bi-continuous composite microstructures captured with TriBeam serial-sectioning. Computational Materials Science. 131:187–195.