Publications
"Influence of BN microstructure on oxidation of SiC/BN/SiC composites." Journal of the American Ceramic Society 2024; e20230. (2024).
"An integrated analysis of transport, oxidation, and creep during oxidation of interior pores in SiC." Journal of the American Ceramic Society 106 (2023): 3736-3748.
"Interactions of hafnia/hafnon composites with molten silicate deposits." Journal of the European Ceramic Society 43 (2023): 5359-5372.
"Insights into internal oxidation of SiC/BN/SiC composites." Journal of the American Ceramic Society (2022).
"Integrating lattice materials science into the traditional processing–structure–properties paradigm." MRS Communications 9 (2019): 1284-1291.
"Insights from in-situ X-ray computed tomography during axial impregnation of unidirectional fiber beds." Composites Part A: Applied Science and Manufacturing 107 (2018): 124-134.
"In-situ 3D visualization of composite microstructure during polymer-to-ceramic conversion." Acta Materialia 144 (2018): 579-589.
"Interaction of yttrium disilicate environmental barrier coatings with calcium-magnesium-iron alumino-silicate melts." Acta Materialia 145 (2018): 451-461.
"Insight into 3D micro-CT data: exploring segmentation algorithms through performance metrics." Journal of Synchrotron Radiation 24 (2017): 1065-1077.
"Intermediate temperature oxidative strength degradation of a SiC/SiNC composite with a polymer-derived matrix." JOURNAL OF THE AMERICAN CERAMIC SOCIETY 100 (2017): 1606-1617.
"Intermediate temperature oxidative strength degradation of a SiC/SiNC composite with a polymer-derived matrix." Journal of the American Ceramic Society 100 (2017): 1606-1617.
"Intermediate Temperature Internal Oxidation of a SiC/SiCN Composite with a Polymer-Derived Matrix." JOURNAL OF THE AMERICAN CERAMIC SOCIETY 99 (2016): 3120-3128.
"Impact resistance of TiC-based cermets." INTERNATIONAL JOURNAL OF IMPACT ENGINEERING 62 (2013): 75-87.
"Impact response of layered steel-alumina targets." MECHANICS OF MATERIALS 60 (2013): 80-92.
"IMPLICATIONS OF SHAKEDOWN FOR DESIGN OF ACTIVELY COOLED THERMOSTRUCTURAL PANELS." JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES 6 (2011): 1313-1327.
"Interface properties in a porous-matrix oxide composite." JOURNAL OF THE AMERICAN CERAMIC SOCIETY 89 (2006): 2869-2873.
"In-plane fracture resistance of a crossply fibrous monolith." JOURNAL OF THE AMERICAN CERAMIC SOCIETY 84 (2001): 367-375.
"In-plane mechanical properties of an all-oxide ceramic composite." JOURNAL OF THE AMERICAN CERAMIC SOCIETY 82 (1999): 2721-2730.
"Inelastic deformation of fiber composites containing bridged cracks." MECHANICS OF MATERIALS 26 (1997): 81-92.
"Influence of thermal expansion mismatch on residual stresses and flow response of microballoon composites." MECHANICS OF MATERIALS 23 (1996): 133-146.
"INFLUENCE OF INTERPARTICLE FORCES ON THE RHEOLOGICAL BEHAVIOR OF PRESSURE-CONSOLIDATED ALUMINA PARTICLE SLURRIES." JOURNAL OF THE AMERICAN CERAMIC SOCIETY 77 (1994): 216-220.
"INTERFACIAL FATIGUE IN A FIBER-REINFORCED METAL-MATRIX COMPOSITE." ACTA METALLURGICA ET MATERIALIA 42 (1994): 2675-2681.
"THE INFLUENCE OF PRESSURE ON FRACTURE OF A TI-V PLATE STEEL." CANADIAN METALLURGICAL QUARTERLY 30 (1991): 31-37.
"ON THE INFLUENCE OF HYDROSTATIC-PRESSURE ON THE FRACTURE OF NI3AL." SCRIPTA METALLURGICA 23 (1989): 1893-1897.

]