Publications
Export 39 results:
[ Author] Title Type Year Filters: First Letter Of Last Name is C [Clear All Filters]
Determination of Surface Topography from Laser Ablation using EBSD. Microscopy and Microanalysis. 21:2369–2370.
.
2015. Three-dimensional texture visualization approaches: theoretical analysis and examples. Journal of Applied Crystallography. 50:430–440.
.
2017. Reconstruction of Laser-Induced Surface Topography from Electron Backscatter Diffraction Patterns. Microscopy and Microanalysis. 23:730–740.
.
2017. Transmission Scanning Electron Microscopy: Defect Observations and Image Simulations. Ultramicroscopy . 186
.
2018. Sustainability through alloy design: Challenges and opportunities. Progress in Materials Science. :100722.
.
2020. COMPRESSION CREEP BEHAVIOR OF B 2 AL-NI-RU TERNARY ALLOYS. Advanced Intermetallic-Based Alloys(MRS Symposium Proceedings Series Volume 980). 980:45–50.
.
2007. Compression Creep Behavior of B2 AL-Ni-Ru Ternary Alloys. MRS Proceedings. 980:0980–II01.
.
2006. Experimental investigation and thermodynamic modelling of the Mg–Al-rich region of the Mg–Al–Sr System. International Journal of Materials Research. 97:422-428.
.
2022. Creep deformation mechanisms in Ru-Ni-Al ternary B2 alloys. Metallurgical and Materials Transactions A. 39:39–49.
.
2008. Deformation mechanisms in a Ru–Ni–Al ternary B2 intermetallic alloy. Acta materialia. 55:2715–2727.
.
2007. Experimental investigation and thermodynamic modelling of the Mg–Al-rich region of the Mg–Al–Sr System. Zeitschrift für Metallkunde. 97:422–428.
.
2006. Microstructural evolution and failure characteristics of a NiCoCrAlY bond coat in “hot spot” cyclic oxidation. Acta Materialia. 57:3885–3894.
.
2009. Oxidation of ruthenium aluminide-based alloys: The role of microstructure and platinum additions. Intermetallics. 15:34–43.
.
2007. On the Localization of Plastic Strain in Microtextured Regions of Ti-6Al-4V. Acta Materialia. 204:116492.
.
2021. The suppression of instabilities via biphase interfaces during bulk fabrication of nanograined Zr. Materials Research Letters. 3:50–57.
.
2015. Bulk texture evolution of nanolamellar Zr–Nb composites processed via accumulative roll bonding. Acta Materialia. 92:97–108.
.
2015. High refractory, low misfit Ru-containing single-crystal superalloys. Metallurgical and Materials Transactions A. 37:2927–2938.
.
2006. Elemental partitioning in Ru-containing nickel-base single crystal superalloys. Materials Science and Engineering: A. 457:292–299.
.
2007. Interfacial Dislocation Networks and creep in directional coarsened Ru-containing nickel-base single-crystal superalloys. Metallurgical and Materials Transactions A. 39:1290–1307.
.
2008. Dynamic deformation and damage in cast $\gamma$-TiAl during taylor cylinder impact: Experiments and model validation. Metallurgical and Materials Transactions A. 35:2557–2566.
.
2004. Symposium on Dynamic Deformation: Constitutive Modeling, Grain Size, and Other Effects–In Honor of Prof. Ronald W. Armstrong-Dynamic Deformation and Damage in Cast g-TiAl during Taylor Cylinder. Metallurgical and Materials Transactions-Series A. 35:2557–2566.
.
2004. Crack initiation anisotropy of Ni-based SX superalloys in the very high cycle fatigue regime. Materials Science and Engineering: A. 825:141920.
.
2021. Damage mechanisms during very high cycle fatigue of a coated and grit-blasted Ni-based single-crystal superalloy. International Journal of Fatigue. 142
.
2021. Creep, Fatigue, and Oxidation Interactions During High and Very High Cycle Fatigue at Elevated Temperature of Nickel-Based Single Crystal Superalloys. Superalloys 2020.
.
2020. Design of Nickel-Cobalt-Ruthenium Multi-Principal Element Alloys. Acta Materialia. :16013.
.
2020.