Publications
] .
2003. Mechanical Behavior of Ternary and Quaternary RuAl Alloys. MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS. 753:89–96.
.
2003. Microstructural stability and creep of rare-earth containing magnesium alloys. Scripta Materialia. 48:1029–1034.
.
2003. Phase instabilities and carbon additions in single-crystal nickel-base superalloys. Materials Science and Engineering: A. 348:111–121.
.
2003. Solidification of high-refractory ruthenium-containing superalloys. Acta Materialia. 51:269–284.
.
2003. Stabilization of thermosolutal convective instabilities in Ni-based single-crystal superalloys: Carbide precipitation and Rayleigh numbers. Metallurgical and Materials Transactions A. 34:1953–1967.
.
2004. Deformation of Ru–Al–Ta ternary alloys. Intermetallics. 12:755–762.
.
2004. Development of ultrasonic fatigue for rapid, high temperature fatigue studies in turbine engine materials. 10th International Symposium on Superalloys, Champion, PA, September. :19–23.
.
2004. Directional solidification of large superalloy castings with radiation and liquid-metal cooling: a comparative assessment. Metallurgical and Materials Transactions A. 35:3221–3231.
.
2004. Dynamic deformation and damage in cast $\gamma$-TiAl during taylor cylinder impact: Experiments and model validation. Metallurgical and Materials Transactions A. 35:2557–2566.
.
2004. New Phases in Ruthenium-Containing Single-Crystal Superalloys. Superalloys 2004: The Tenth International Symposium on Superalloys. :769–778.
.
2004. Observation of a Ru-rich Heusler phase in a multicomponent Ni-base superalloy. Scripta materialia. 50:849–854.
.
2004. Predicting freckle formation in single crystal Ni-base superalloys. Journal of materials science. 39:7199–7205.
.
2004. The Re (Ru)-rich $δ$-phase in Ru-containing superalloys. Materials Science and Engineering: A. 373:239–249.
.
2004. Structure and transition of eutectic (Mg, Al) 2 Ca Laves phase in a die-cast Mg–Al–Ca base alloy. Scripta Materialia. 51:1005–1010.
.
2004. Symposium on Dynamic Deformation: Constitutive Modeling, Grain Size, and Other Effects–In Honor of Prof. Ronald W. Armstrong-Dynamic Deformation and Damage in Cast g-TiAl during Taylor Cylinder. Metallurgical and Materials Transactions-Series A. 35:2557–2566.
.
2004. Thermal expansion behavior of ruthenium aluminides. Scripta Materialia. 50:845–848.
.
2005. Femtosecond laser micromachining of a single-crystal superalloy. Scripta materialia. 53:511–516.
.
2005. New phases in a multicomponent high ruthenium single crystal superalloy. Materials Science Forum. 475:655–660.
.
2005. Solidification and Microstructure of Mg-Al-(Ca, Sr, Ce, La) Ternary Alloys. Essential Readings in Magnesium Technology. :199–204.
.
2005. Solidification paths and eutectic intermetallic phases in Mg–Al–Ca ternary alloys. Acta Materialia. 53:2823–2834.
.
2006. Experimental assessment of the Ru–Al–Ni ternary phase diagram at 1000 and 1100° C. Materials Science and Engineering: A. 430:266–276.
.
2006. Femtosecond laser machining of single-crystal superalloys through thermal barrier coatings. Materials Science and Engineering: A. 430:203–207.
.
2006. Grain-scale strain mapping for analysis of slip activity in polycrystalline B2 RuAl. Philosophical Magazine. 86:3995–4008.
.
2006. High refractory, low misfit Ru-containing single-crystal superalloys. Metallurgical and Materials Transactions A. 37:2927–2938.
.
2006. Microstructural observations of as-prepared and thermal cycled NiCoCrAlY bond coats. Surface and Coatings Technology. 201:3918–3925.