Surface damage due to impact and fatigue strength reduction in gamma titanium aluminides. Minerals, Metals and Materials Society/AIME(USA),. :435–442.. 1997.
Cast structure and property variability in gamma titanium aluminides. Intermetallics. 6:629–636.. 1998.
Creep deformation and the evolution of precipitate morphology in nickel-based single crystals. Modelling of Microstructural Evolution in Creep Resistant Materials. :1998.. 1998.
Low temperature deformation kinetics of ruthenium aluminide alloys. MRS Proceedings. 552:KK7–11.. 1998.
Rate sensitivities for low temperature deformation in ruthenium aluminide alloys. Scripta materialia. 38:1065–1069.. 1998.
Deformation-induced point defects in NiAl single crystals. Intermetallics. 7:1255–1260.. 1999.
Determination of matrix and precipitate elastic constants in ($\gamma$–$\gamma$′) Ni-base model alloys, and their relevance to rafting. Materials Science and Engineering: A. 260:212–221.. 1999.
Displacement Mapping During In-Situ Straining In The SEM. MICROSCOPY AND MICROANALYSIS-NEW YORK-. 5:334–335.. 1999.
Evolution of substructures in deformed NiAl single crystals oriented for single slip. Philosophical Magazine A. 79:1555–1566.. 1999.
Low temperature deformation and dislocation substructure of ruthenium aluminide polycrystals. Acta materialia. 47:1035–1042.. 1999.
Room temperature fatigue response of $\gamma$-TiAl to impact damage. Scripta materialia. 40:445–449.. 1999.
Superalloys 2000. Ninth International Symposium on Superalloys. :2000.. 2000.
A comparative analysis of low temperature deformation in B2 aluminides. Materials Science and Engineering: A. 317:241–248.. 2001.
DYNAMIC DEFORMATION AND DAMAGE IN CAST Y-TIAL DURING TAYLOR CYLINDER IMPACT: EXPERIMENTS AND MODEL VALIDATION. Structural Intermetallics, 2001: ISSI: Proceedings of the Third International Symposium on Structural Intermetallics. 1:269.. 2001.
On the effect of low and high pressure hydrogen charging on the oxidation of a Ti–48Al–2Cr–2Nb alloy. Materials Science and Engineering: A. 318:224–234.. 2001.
Influence of microstructure and strain distribution on failure properties in intermetallic TiAl-based alloys. Materials Science and Engineering: A. 319:613–617.. 2001.
Microstructural characterization of a die-cast magnesium-rare earth alloy. Scripta Materialia. 45:1423–1429.. 2001.
The role of impact damage and fatigue strength reduction in gamma titanium aluminide alloys. Structural Intermetallics. :259–268.. 2001.
Special issue-Micromechanics and micromechanisms of deformation and fracture: A special issue in honor of professor Ali S. Argon-Preface.. 2001.
Stabilization of thermosolutal convective instabilities in Ni-based single-crystal superalloys: Carbon additions and freckle formation. Metallurgical and Materials Transactions A. 32:1743–1753.. 2001.
Dislocations and high-temperature plastic deformation of superalloy single crystals. Dislocations in solids. 11:547–618.. 2002.
Mechanical Behavior of Ternary and Quaternary Rual Alloys. MRS Proceedings. 753:BB2–11.. 2002.
Defect reduction in large superalloy castings by liquid-tin assisted solidification.. PARSONS 2003: Sixth International Charles Parsons Turbine Conference. :649–661.. 2003.
Deformation of a platinum-containing RuAl intermetallic by< 111> dislocations. Scripta materialia. 48:1087–1092.. 2003.
Elevated temperature deformation and dynamic strain aging in polycrystalline RuAl alloys. Intermetallics. 11:1029–1038.. 2003.