Publications

Export 50 results:
Author Title [ Type(Asc)] Year
Filters: Author is Pollock, Tresa M.  [Clear All Filters]
Journal Article
Levin EE, Long F, Douglas JE, Buffon MLC, Lamontagne LK, Pollock TM, Seshadri R.  2018.  Enhancing thermoelectric properties through control of Nickel Interstitials and phase separation in Heusler/Half-Heusler TiNi1.1Sn composites. Materials. 11:1–12.
Norman J, Kennedy M.J., Selvidge J, Li Q, Wan Y, Liu AY, Callahan PG, Echlin MP, Pollock TM, Lau KMay et al..  2017.  Electrically pumped continuous wave quantum dot lasers epitaxially grown on patterned, on-Axis (001) Si. Optics Express. 25:3927–3934.
Stinville J.C, Yao ER, Callahan PG, Shin J, Wang F, Echlin MP, Pollock TM, Gianola DS.  2019.  Dislocation dynamics in a nickel-based superalloy via in-situ transmission scanning electron microscopy. Acta Materialia. 168:152–166.
Shishvan SS, Mcmeeking RM, Pollock TM, Deshpande VS.  2018.  Discrete dislocation plasticity analysis of the high-temperature cyclic response of composites. Materials Science and Engineering: A. 712:714–719.
Shishvan SS, Mcmeeking RM, Pollock TM, Deshpande VS.  2017.  Discrete dislocation plasticity analysis of the effect of interfacial diffusion on the creep response of Ni single-crystal superalloys. Acta Materialia. 135:188–200.
Polonsky AT, Echlin MP, Lenthe WC, Dehoff RR, Kirka MM, Pollock TM.  2018.  Defects and 3D structural inhomogeneity in electron beam additively manufactured Inconel 718. Materials Characterization. 143:171–181.
Avallone JT, Nizolek TJ, Bales BB, Pollock TM.  2019.  Creep resistance of bulk copper–niobium composites: An inverse effect of multilayer length scale. Acta Materialia. 176:189–198.
Rhein RK, Callahan PG, Murray SP, Stinville J-C, Titus MS, Van der Ven A, Pollock TM.  2018.  Creep Behavior of Quinary γ′-Strengthened Co-Based Superalloys. Metallurgical and Materials Transactions A. 49:4090–4098.
Strub F, Charpagne M-agathe, Pollock TM.  2019.  Correction of Electron Back-scattered Diffraction datasets using an evolutionary algorithm. arXiv. :1–10.
Latypov MI, Charpagne MAgathe, Souther M, Goodlet BR, Echlin MP, Beyerlein IJ, Pollock TM.  2019.  Computational homogenization for multiscale forward modeling of resonant ultrasound spectroscopy of heterogeneous materials. Materials Characterization. 158:109945.
Stinville JCharles, Martin E, Karadge M, Ismonov S, Soare M, Hanlon T, Sundaram S, Echlin MLLP, Callahan PG, Lenthe WC et al..  2018.  Competing Modes for Crack Initiation from Non-metallic Inclusions and Intrinsic Microstructural Features During Fatigue in a Polycrystalline Nickel-Based Superalloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 49:3865–3873.
Polonsky AT, Pollock TM.  2020.  Closing the science gap in 3D metal printing. Science. 368:583–584.
Latypov MI, Khan A, Lang CA, Kvilekval K, Polonsky AT, Echlin MLLP, Beyerlein IJ, Manjunath B.S, Pollock TM.  2019.  BisQue for 3D Materials Science in the Cloud: Microstructure–Property Linkages. Integrating Materials and Manufacturing Innovation. 8:52–65.
Bales B, Petzold L, Goodlet BR, Lenthe WC, Pollock TM.  2018.  Bayesian inference of elastic properties with resonant ultrasound spectroscopy. The Journal of the Acoustical Society of America. 143:71–83.
Latypov MI, Kühbach M, Beyerlein IJ, Stinville JCharles, Toth LS, Pollock TM, Kalidindi SR.  2018.  Application of chord length distributions and principal component analysis for quantification and representation of diverse polycrystalline microstructures. Materials Characterization. 145:671–685.
Lenthe WC, Stinville JCharles, Echlin MP, Chen Z, Daly S, Pollock TM.  2018.  Advanced detector signal acquisition and electron beam scanning for high resolution SEM imaging. Ultramicroscopy. 195:93–100.
Charpagne MAgathe, Strub F, Pollock TM.  2019.  Accurate reconstruction of EBSD datasets by a multimodal data approach using an evolutionary algorithm. Materials Characterization. 150:184–198.
Stewart CA, Murray SP, Suzuki A, Pollock TM, Levi CG.  2020.  Accelerated discovery of oxidation resistant CoNi-base γ/γ' alloys with high L12 solvus and low density. Materials and Design. 189:1–12.
Martin JH, Yahata BD, Hundley JM, Mayer JA, Schaedler TA, Pollock TM.  2017.  3D printing of high-strength aluminium alloys. Nature. 549:365–369.
Book Chapter
Ghosh S, Weber G, Pinz M, Bagri A, Pollock TM, Lenthe W, Stinville J-C, Uchic MD, Woodward C.  2020.  Multi-scale Microstructure and Property-Based Statistically Equivalent RVEs for Modeling Nickel-Based Superalloys. Integrated Computational Materials Engineering (ICME): Advancing Computational and Experimental Methods. :55–90.
Echlin MP, Lenthe WC, Stinville J-C, Pollock TM.  2020.  Acquisition of 3D Data for Prediction of Monotonic and Cyclic Properties of Superalloys. Integrated Computational Materials Engineering (ICME): Advancing Computational and Experimental Methods. :1–18.

Pages