Publications
The influence of microstructure on the measurement of yy'lattice mismatch in single-crystal Ni-base superalloys. Materials Science & Engineering A. 1:8–15.
.
1996. The influence of microstructure on the measurement of $\gamma$-$\gamma$′ lattice mismatch in single-crystal Ni-base superalloys. Materials Science and Engineering: A. 210:8–15.
.
1996. Influence of microstructure and strain distribution on failure properties in intermetallic TiAl-based alloys. Materials Science and Engineering: A. 319:613–617.
.
2001. In situ synchrotron X-ray imaging of high-cycle fatigue crack propagation in single-crystal nickel-base alloys. Acta Materialia. 59:5103–5115.
.
2011. In situ Femtosecond Laser and Argon Ion Beams for 3D Microanalysis using the TriBeam. Microscopy and Microanalysis. 21:1847–1848.
.
2015. Hybrid intermetallic Ru/Pt-modified bond coatings for thermal barrier systems. Surface and Coatings Technology. 202:349–361.
.
2007. High resolution mapping of strain localization near twin boundaries in a nickel-based superalloy. Acta Materialia. 98:29–42.
.
2015. High refractory, low misfit Ru-containing single-crystal superalloys. Metallurgical and Materials Transactions A. 37:2927–2938.
.
2006. Grain-scale strain mapping for analysis of slip activity in polycrystalline B2 RuAl. Philosophical Magazine. 86:3995–4008.
.
2006. Grain-scale creep processes in Mg–Al–Ca base alloys: Implications for alloy design. Scripta Materialia. 63:692–697.
.
2010. Grain defect formation during directional solidification of nickel base single crystals. Superalloys 1992. :125–134.
.
1992. Formation of secondary reaction zone in ruthenium bearing nickel based single crystal superalloys with diffusion aluminide coatings. Materials Science and Technology. 25:300–308.
.
2009. Fluid flow and defect formation in the three-dimensional dendritic structure of nickel-based single crystals. Metallurgical and Materials Transactions A. 43:369–380.
.
2012. Femtosecond pulsed laser damage characteristics of 7% Y2O3-ZrO2 thermal barrier coating. Applied Physics A. 91:421–428.
.
2008. Femtosecond Laser Tomography Using the TriBeam System. Microscopy and Microanalysis. 19:698–699.
.
2013. Femtosecond laser micromachining of a single-crystal superalloy. Scripta materialia. 53:511–516.
.
2005. Femtosecond laser machining of single-crystal superalloys through thermal barrier coatings. Materials Science and Engineering: A. 430:203–207.
.
2006. Femtosecond Laser Damage in Metals and Semiconductors During TriBeam Tomography. Microsc. Microanal. 22:3.
.
2016. Femtosecond laser ablation regimes in a single-crystal superalloy. Metallurgical and Materials Transactions A. 38:2349–2357.
.
2007. Failure by shear during plane strain stretching of a duplex steel. TMS (The Metallurgical Society) Paper Selection;(USA). 56
.
1984. .
1996. Experimental investigation and thermodynamic modeling of the Co-rich region in the Co-Al-Ni-W quaternary system. Journal of Phase Equilibria and Diffusion. 35:595–611.
.
2014. Experimental assessment of the Ru–Al–Ni ternary phase diagram at 1000 and 1100° C. Materials Science and Engineering: A. 430:266–276.
.
2006. Evolution of substructures in deformed NiAl single crystals oriented for single slip. Philosophical Magazine A. 79:1555–1566.
.
1999. Elevated temperature deformation and dynamic strain aging in polycrystalline RuAl alloys. Intermetallics. 11:1029–1038.
.
2003.