Publications
] .
2005. Phase Transformation and Creep of Mg-Al-Ca Based Die-Cast Alloys. Essential Readings in Magnesium Technology. :291–296.
.
2007. High Temperature Strength of Co-based gamma/gamma' Superalloys. Advanced Intermetallic-Based Alloys(MRS Symposium Proceedings Series Volume 980). 980:499–504.
.
2010. Crack progression during sustained-peak low-cycle fatigue in single-crystal Ni-base superalloy René N5. Metallurgical and Materials Transactions A. 41:947–956.
.
2006. Phase equilibria in the Mg-Al-Ca ternary system at 773 and 673 K. Metallurgical and Materials Transactions A. 37:975–983.
.
2008. Precipitation strengthening of a Mg-Al-Ca–based AXJ530 die-cast alloy. Metallurgical and Materials Transactions A. 39:696–702.
.
2007. Effect of Sr additions on the microstructure and strength of a Mg-Al-Ca ternary alloy. Metallurgical and Materials Transactions A. 38:420–427.
.
2005. Solidification paths and eutectic intermetallic phases in Mg–Al–Ca ternary alloys. Acta Materialia. 53:2823–2834.
.
2004. Structure and transition of eutectic (Mg, Al) 2 Ca Laves phase in a die-cast Mg–Al–Ca base alloy. Scripta Materialia. 51:1005–1010.
.
2008. High-temperature strength and deformation of $\gamma$/$\gamma$′ two-phase Co–Al–W-base alloys. Acta Materialia. 56:1288–1297.
.
2007. Flow stress anomalies in $\gamma$/$\gamma$′ two-phase Co–Al–W-base alloys. Scripta Materialia. 56:385–388.
.
2020. Microscale characterization of damage accumulation in CMCs. Journal of the European Ceramic Society.
.
2021. Interpreting acoustic energy emission in SiC/SiC minicomposites through modeling of fracture surface areas. Journal of the European Ceramic Society.
.
2021. Microscale Characterization of Damage Accumulation in CMCs. Journal of the European Ceramic Society. 41:3082-3093.
.
2008. A comparative examination of aging and creep behavior of die-cast MRI230D and AXJ530. Symposium on Magnesium Technology 2008 (TMS 9 March 2008 to 13 March 2008). :117–122.
.
2011. Creep and Elemental Partitioning Behavior of Mg-Al-Ca-Sn Alloys with the Addition of Sr. Magnesium Technology 2011. :215–222.
.
2012. The dependence of creep behavior on elemental partitioning in Mg-5Al-3Ca-xSn alloys. Metallurgical and Materials Transactions A. 43:3120–3134.
.
2010. Elemental partitioning and microstructure of Mg-Al-Ca-Sn quaternary alloys. TMS 2010: Aluminium and Magnesium (TMS 14 February 2010 to 18 February 2010). :1–5.
.
2010. Partitioning of Solute to the Primary $\alpha$-Mg Phase in Creep-Resistant Mg-Al-Ca–Based Cast Alloys. Metallurgical and Materials Transactions A. 41:2435–2442.
.
2016. Microstructural features controlling the variability in low-cycle fatigue properties of alloy Inconel 718DA at intermediate temperature. Metallurgical and Materials Transactions A. 47:1096–1109.
.
2019. Short crack propagation from cracked non-metallic inclusions in a Ni-based polycrystalline superalloy. Acta Materialia. 165:241–258.
.
2020. Role of Non-metallic Inclusions and Twins on the Variability in Fatigue Life in Alloy 718 Nickel Base Superalloy. Superalloys 2020.
.
2015. A sharp computational method for the simulation of the solidification of binary alloys. Journal of Scientific Computing. 63:330–354.
.
1991. Creep of $\alpha$ 2+ $\beta$ Titanium Aluminide Alloys. ISIJ International. 31:1139–1146.
.
2000. Carbides and grain defect formation in directionally solidified nickel-base superalloys. Advanced Technologies for Superalloy Affordability as held at the 2000 TMS Annual Meeting. :2000.
.
2004. Predicting freckle formation in single crystal Ni-base superalloys. Journal of materials science. 39:7199–7205.