Export 439 results:Author Title [ Type] Year
Filters: First Letter Of Last Name is P [Clear All Filters]
Predicting freckle formation in single crystal Ni-base superalloys. Journal of materials science. 39:7199–7205.. 2004.
Prediction of Fatigue-Initiating Twin Boundaries in Polycrystalline Nickel Superalloys Informed by TriBeam Tomography. Microscopy and Microanalysis. 22:1732–1733.. 2016.
Prediction of Magnesium Alloy Formability: The Role of Texture. Magnesium Technology 2016. :257–262.. 2016.
Prediction of tensile stiffness and strength of Ti-6Al-4V using instantiated volume elements and crystal plasticity. Acta Materialia. 157:21–32.. 2018.
Prediction of the plastic anisotropy of magnesium alloys with synthetic textures and implications for the effect of texture on formability. Materials Science and Engineering: A. 675:345–360.. 2016.
Process Simulation for the Directional Solidification of a Tri-Crystal Ring Segment via the Bridgman and Liquid-Metal-Cooling Processes. Metallurgical and Materials Transactions A. 43:2414–2425.. 2012.
Processing and deformation behavior of bulk Cu–Nb nanolaminates. Metallography, Microstructure, and Analysis. 3:470–476.. 2014.
Processing to fatigue properties: benefits of high gradient casting for single crystal airfoils. Superalloys 2012. :379–385.. 2012.
Protocols for High Temperature Assisted-Microwave Preparation of Inorganic Compounds. Chemistry of Materials. 31:7151–7159.. 2019.
A Pt-modified Ni-base superalloy with high temperature precipitate stability. Materials Science and Engineering: A. 639:747–754.. 2015.
Pulsed-terahertz reflectometry for health monitoring of ceramic thermal barrier coatings. Optics express. 18:3477–3486.. 2010.
Qualitative Characterization of a Thermal Barrier Coating System Using Femtosecond Laser-Induced Breakdown Spectroscopy. MATERIALS SCIENCE AND TECHNOLOGY-ASSOCIATION FOR IRON AND STEEL TECHNOLOGY-. 5:621.. 2006.
Quantitative Analysis of Correlated 3D Strontium Titanate Datasets Collected by TriBeam and Diffraction Contrast Tomography. Microscopy and Microanalysis. 21:2043–2044.. 2015.
Quantitative voxel-to-voxel comparison of TriBeam and DCT strontium titanate three-dimensional data sets. Journal of Applied Crystallography. 48:1034–1046.. 2015.
Rapid Assessment of Oxidation Behavior in Co-Based γ/γ′ Alloys. Oxidation of Metals. 90:485–498.. 2018.
Rate sensitivities for low temperature deformation in ruthenium aluminide alloys. Scripta materialia. 38:1065–1069.. 1998.
The Re (Ru)-rich $δ$-phase in Ru-containing superalloys. Materials Science and Engineering: A. 373:239–249.. 2004.
Reconstruction of Laser-Induced Surface Topography from Electron Backscatter Diffraction Patterns. Microscopy and Microanalysis. 23:730–740.. 2017.
Recrystallization and the Development of Abnormally Large Grains After Small Strain Deformation in a Polycrystalline Nickel-Based Superalloy. Metallurgical and Materials Transactions A. 47:1566–1574.. 2016.
Recrystallization Behavior of a MgAlCa Alloy during Thermomechanical Processing and Subsequent Heat Treatment. Magnesium Technology 2013. :203–209.. 2013.
Rejuvenation of Nickel-Based Superalloys GTD444 (DS) and René N5 (SX). Superalloys 2012. :341–349.. 2012.
A robust method to characterize rumpling in high-strength bond coats. Surface and Coatings Technology. 317:148–157.. 2017.
The Role of Creep Deformation in Directional Coarsening of gamma' in Nickel-Base Single Crystals. Modeling of Coarsening and Grain Growth. :35–44.. 1992.
The role of impact damage and fatigue strength reduction in gamma titanium aluminide alloys. Structural Intermetallics. :259–268.. 2001.