Publications
Solute partitioning in multi-component $\gamma$/$\gamma$′ Co–Ni-base superalloys with near-zero lattice misfit. Scripta Materialia. 113:185–189.
.
2016. Solidification paths and eutectic intermetallic phases in Mg–Al–Ca ternary alloys. Acta Materialia. 53:2823–2834.
.
2005. Solidification of high-refractory ruthenium-containing superalloys. Acta Materialia. 51:269–284.
.
2003. Solidification and Microstructure of Mg-Al-(Ca, Sr, Ce, La) Ternary Alloys. Essential Readings in Magnesium Technology. :199–204.
.
2005. Soldification segregation in ruthenium-containing nickel-base superalloys. Metallurgical and Materials Transactions A. 37:1949–1962.
.
2006. On Slip Initiation in Equiaxed Alpha/Beta Ti-6Al-4V. Acta Materialia. 136
.
2017. Simulation of diffusion-limited lateral growth of dendrites during solidification via liquid metal cooling. Acta Materialia. 69:47–59.
.
2014. .
2006. Room temperature fatigue response of $\gamma$-TiAl to impact damage. Scripta materialia. 40:445–449.
.
1999. The role of impact damage and fatigue strength reduction in gamma titanium aluminide alloys. Structural Intermetallics. :259–268.
.
2001. The Role of Creep Deformation in Directional Coarsening of gamma' in Nickel-Base Single Crystals. Modeling of Coarsening and Grain Growth. :35–44.
.
1992. .
1996. Rejuvenation of Nickel-Based Superalloys GTD444 (DS) and René N5 (SX). Superalloys 2012. :341–349.
.
2012. Recrystallization Behavior of a MgAlCa Alloy during Thermomechanical Processing and Subsequent Heat Treatment. Magnesium Technology 2013. :203–209.
.
2013. The Re (Ru)-rich $δ$-phase in Ru-containing superalloys. Materials Science and Engineering: A. 373:239–249.
.
2004. Rate sensitivities for low temperature deformation in ruthenium aluminide alloys. Scripta materialia. 38:1065–1069.
.
1998. Quantitative Analysis of Correlated 3D Strontium Titanate Datasets Collected by TriBeam and Diffraction Contrast Tomography. Microscopy and Microanalysis. 21:2043–2044.
.
2015. Qualitative Characterization of a Thermal Barrier Coating System Using Femtosecond Laser-Induced Breakdown Spectroscopy. MATERIALS SCIENCE AND TECHNOLOGY-ASSOCIATION FOR IRON AND STEEL TECHNOLOGY-. 5:621.
.
2006. Processing and deformation behavior of bulk Cu–Nb nanolaminates. Metallography, Microstructure, and Analysis. 3:470–476.
.
2014. Process Simulation for the Directional Solidification of a Tri-Crystal Ring Segment via the Bridgman and Liquid-Metal-Cooling Processes. Metallurgical and Materials Transactions A. 43:2414–2425.
.
2012. Prediction of Magnesium Alloy Formability: The Role of Texture. Magnesium Technology 2016. :257–262.
.
2016. Predicting freckle formation in single crystal Ni-base superalloys. Journal of materials science. 39:7199–7205.
.
2004. Precipitation strengthening of a Mg-Al-Ca–based AXJ530 die-cast alloy. Metallurgical and Materials Transactions A. 39:696–702.
.
2008. Post-fabrication vapor phase strengthening of nickel-based sheet alloys for thermostructural panels. Acta Materialia. 56:4577–4584.
.
2008. Planar defect formation in the g′ phase during high temperature creep in single crystal CoNi-base superalloys. Acta Materialia. 113:335–349.
.
2016.