Export 40 results:Author Title [ Type] Year
Filters: First Letter Of Title is D [Clear All Filters]
Defect reduction in large superalloy castings by liquid-tin assisted solidification.. PARSONS 2003: Sixth International Charles Parsons Turbine Conference. :649–661.. 2003.
DEFORMATION OF NiAl-BASED INTERMETALLICS. Micromechanics of Advanced Materials: A Symposium in Honor of Professor James CM Li's 70th Birthday: Proceedings of a Symposium. :205.. 1995.
Development of ultrasonic fatigue for rapid, high temperature fatigue studies in turbine engine materials. 10th International Symposium on Superalloys, Champion, PA, September. :19–23.. 2004.
Dislocation substructure in NiAl single crystals deformed at ambient temperature. MRS Proceedings. 460:493.. 1996.
DYNAMIC DEFORMATION AND DAMAGE IN CAST Y-TIAL DURING TAYLOR CYLINDER IMPACT: EXPERIMENTS AND MODEL VALIDATION. Structural Intermetallics, 2001: ISSI: Proceedings of the Third International Symposium on Structural Intermetallics. 1:269.. 2001.
Dynamics of Ultrafast Laser Induced Damage in Single Crystal Ni-Based Superalloy During Machining. Advanced Intermetallic-Based Alloys(MRS Symposium Proceedings Series Volume 980). 980:571–576.. 2007.
Dynamics of Ultrafast Laser Induced Damage in Single Crystal Ni-Based Superalloy During Machining. MRS Proceedings. 980:0980–II05.. 2006.
Defects and 3D structural inhomogeneity in electron beam additively manufactured Inconel 718. Materials Characterization. 143:171–181.. 2018.
Deformation and strain storage mechanisms during high-temperature compression of a powder metallurgy nickel-base superalloy. Metallurgical and Materials Transactions A. 41:2002–2009.. 2010.
Deformation mechanisms in a Ru–Ni–Al ternary B2 intermetallic alloy. Acta materialia. 55:2715–2727.. 2007.
Deformation of a platinum-containing RuAl intermetallic by< 111> dislocations. Scripta materialia. 48:1087–1092.. 2003.
Deformation of Ru–Al–Ta ternary alloys. Intermetallics. 12:755–762.. 2004.
Deformation-induced point defects in NiAl single crystals. Intermetallics. 7:1255–1260.. 1999.
The dependence of creep behavior on elemental partitioning in Mg-5Al-3Ca-xSn alloys. Metallurgical and Materials Transactions A. 43:3120–3134.. 2012.
Depth-profiling study of a thermal barrier coated superalloy using femtosecond laser-induced breakdown spectroscopy. Spectrochimica Acta Part B: Atomic Spectroscopy. 63:27–36.. 2008.
Design of Nickel-Cobalt-Ruthenium Multi-Principal Element Alloys. Acta Materialia. :16013.. 2020.
Designing nickel base alloys for microstructural stability through low γ-γ′ interfacial energy and lattice misfit. Materials and Design. 140:249–256.. 2018.
Detecting Recrystallization in a Single Crystal Ni-Base Alloy using Resonant Ultrasound Spectroscopy. NDT & E International.. 2016.
Detection of a marker layer in a 7YSZ thermal barrier coating by femtosecond laser-induced breakdown spectroscopy. Surface and Coatings Technology. 202:3940–3946.. 2008.
Determination of matrix and precipitate elastic constants in ($\gamma$–$\gamma$′) Ni-base model alloys, and their relevance to rafting. Materials Science and Engineering: A. 260:212–221.. 1999.
Determination of Surface Topography from Laser Ablation using EBSD. Microscopy and Microanalysis. 21:2369–2370.. 2015.
Development and Application of an Optimization Protocol for Directional Solidification: Integrating Fundamental Theory, Experimentation and Modeling Tools. Superalloys 2012. :653–662.. 2012.
Development and structure of $\alpha$ 2 plates in $\gamma$-based titanium aluminides due to the $\gamma$ to $\alpha$ transformation on heating. Scripta materialia. 40:899–904.. 1999.
Development of dendritic structure in the liquid-metal-cooled, directional-solidification process. Metallurgical and Materials Transactions A. 42:2723–2732.. 2011.