Publications
Export 40 results:
Author [ Title
Filters: First Letter Of Title is D [Clear All Filters]
Dynamics of Ultrafast Laser Induced Damage in Single Crystal Ni-Based Superalloy During Machining. MRS Proceedings. 980:0980–II05.
.
2006. Dynamics of Ultrafast Laser Induced Damage in Single Crystal Ni-Based Superalloy During Machining. Advanced Intermetallic-Based Alloys(MRS Symposium Proceedings Series Volume 980). 980:571–576.
.
2007. Dynamic response of thin films on substrates subjected to femtosecond laser pulses. Acta Materialia. 84:136–144.
.
2015. DYNAMIC DEFORMATION AND DAMAGE IN CAST Y-TIAL DURING TAYLOR CYLINDER IMPACT: EXPERIMENTS AND MODEL VALIDATION. Structural Intermetallics, 2001: ISSI: Proceedings of the Third International Symposium on Structural Intermetallics. 1:269.
.
2001. Dynamic deformation and damage in cast $\gamma$-TiAl during taylor cylinder impact: Experiments and model validation. Metallurgical and Materials Transactions A. 35:2557–2566.
.
2004. Displacement Mapping During In-Situ Straining In The SEM. MICROSCOPY AND MICROANALYSIS-NEW YORK-. 5:334–335.
.
1999. Dislocations and high-temperature plastic deformation of superalloy single crystals. Dislocations in solids. 11:547–618.
.
2002. Dislocation substructures of three die-cast Mg–Al–Ca-based alloys. Scripta Materialia. 58:914–917.
.
2008. Dislocation substructure in NiAl single crystals deformed at ambient temperature. MRS Proceedings. 460:493.
.
1996. Dislocation injection in strontium titanate by femtosecond laser pulses. Journal of Applied Physics. 118:075901.
.
2015. Dislocation dynamics in a nickel-based superalloy via in-situ transmission scanning electron microscopy. Acta Materialia. 168:152–166.
.
2019. Discrete dislocation plasticity analysis of the high-temperature cyclic response of composites. Materials Science and Engineering: A. 712:714–719.
.
2018. Discrete dislocation plasticity analysis of the effect of interfacial diffusion on the creep response of Ni single-crystal superalloys. Acta Materialia. 135:188–200.
.
2017. Discontinuous cellular precipitation in a high-refractory nickel-base superalloy. Metallurgical and Materials Transactions A. 28:2443–2452.
.
1997. Directional solidification of large superalloy castings with radiation and liquid-metal cooling: a comparative assessment. Metallurgical and Materials Transactions A. 35:3221–3231.
.
2004. Directional coarsening in nickel-base single crystals with high volume fractions of coherent precipitates. Acta Metallurgica et Materialia. 42:1859–1874.
.
1994. Direct measurements of slip irreversibility in a nickel-based superalloy using high resolution digital image correlation. Acta Materialia. 186:172–189.
.
2020. Development of ultrasonic fatigue for rapid, high temperature fatigue studies in turbine engine materials. 10th International Symposium on Superalloys, Champion, PA, September. :19–23.
.
2004. Development of $\gamma$ phase stacking faults during high temperature creep of Ru-containing single crystal superalloys. Acta Materialia. 55:5802–5812.
.
2007. The Development of gamma/ gamma Interfacial Dislocation Networks During Creep in Nickel-Base Superalloys. Superalloys 1992. :557–566.
.
1992. Development of dendritic structure in the liquid-metal-cooled, directional-solidification process. Metallurgical and Materials Transactions A. 42:2723–2732.
.
2011. Development and structure of $\alpha$ 2 plates in $\gamma$-based titanium aluminides due to the $\gamma$ to $\alpha$ transformation on heating. Scripta materialia. 40:899–904.
.
1999. Development and Application of an Optimization Protocol for Directional Solidification: Integrating Fundamental Theory, Experimentation and Modeling Tools. Superalloys 2012. :653–662.
.
2012. Determination of Surface Topography from Laser Ablation using EBSD. Microscopy and Microanalysis. 21:2369–2370.
.
2015. Determination of matrix and precipitate elastic constants in ($\gamma$–$\gamma$′) Ni-base model alloys, and their relevance to rafting. Materials Science and Engineering: A. 260:212–221.
.
1999.