Export 30 results:[ Author] Title Type Year
Filters: First Letter Of Title is C [Clear All Filters]
Chromia-Assisted Decarburization of W-Rich Ni-Based Alloys in Impure Helium at 1273 K (1000° C). Metallurgical and Materials Transactions A. 42:1229–1244.. 2011.
A combinatorial investigation of palladium and platinum additions to $\beta$-NiAl overlay coatings. Acta Materialia. 77:379–393.. 2014.
Carburization of W-and Re-rich Ni-based alloys in impure helium at 1000° C. Corrosion Science. 53:388–398.. 2011.
Compression Creep Behavior of B2 AL-Ni-Ru Ternary Alloys. MRS Proceedings. 980:0980–II01.. 2006.
Creep deformation mechanisms in Ru-Ni-Al ternary B2 alloys. Metallurgical and Materials Transactions A. 39:39–49.. 2008.
COMPRESSION CREEP BEHAVIOR OF B 2 AL-NI-RU TERNARY ALLOYS. Advanced Intermetallic-Based Alloys(MRS Symposium Proceedings Series Volume 980). 980:45–50.. 2007.
Creep deformation-induced antiphase boundaries in L1 2-containing single-crystal cobalt-base superalloys. Acta Materialia. 77:352–359.. 2014.
Cyclic oxidation of Ru-containing single crystal superalloys at 1100 C. Materials Science and Engineering: A. 458:184–194.. 2007.
Cast gamma titanium aluminides for low pressure turbine blades: a design case study for intermetallics. Minerals, Metals and Materials Society/AIME, Structural Intermetallics 2001(USA),. :3–12.. 2001.
A comparative investigation of oxide formation on EQ (Equilibrium) and NiCoCrAlY bond coats under stepped thermal cycling. Surface and Coatings Technology. 205:3066–3072.. 2011.
Crystallographic fatigue crack initiation in nickel-based superalloy René 88DT at elevated temperature. Acta Materialia. 57:5964–5974.. 2009.
A comparative analysis of low temperature deformation in B2 aluminides. Materials Science and Engineering: A. 317:241–248.. 2001.
CREEP RESISTANCE OF CMSX-3 NICKEL-BASE SUPERALLOY SINGLE-CRYSTALS (VOL 40, PG 1, 1992). ACTA METALLURGICA ET MATERIALIA. 41:2253–2253.. 1993.
Creep resistance of CMSX-3 nickel base superalloy single crystals. Acta Metallurgica et Materialia. 40:1–30.. 1992.
Creep resistance of nickel-base superalloy single crystals. Creep and fracture of engineering materials and structures. :287–301.. 1990.
Creep deformation and the evolution of precipitate morphology in nickel-based single crystals. Modelling of Microstructural Evolution in Creep Resistant Materials. :1998.. 1998.
Cast structure and property variability in gamma titanium aluminides. Intermetallics. 6:629–636.. 1998.
Creep behavior under isothermal and non-isothermal conditions of AM3 single crystal superalloy for different solutioning cooling rates. Materials Science and Engineering: A. 601:145–152.. 2014.
A combined grain scale elastic–plastic criterion for identification of fatigue crack initiation sites in a twin containing polycrystalline nickel-base superalloy. Acta Materialia. 103:461–473.. 2016.
Crack progression during sustained-peak low-cycle fatigue in single-crystal Ni-base superalloy René N5. Metallurgical and Materials Transactions A. 41:947–956.. 2010.
Creep and Elemental Partitioning Behavior of Mg-Al-Ca-Sn Alloys with the Addition of Sr. Magnesium Technology 2011. :215–222.. 2011.
A comparative examination of aging and creep behavior of die-cast MRI230D and AXJ530. Symposium on Magnesium Technology 2008 (TMS 9 March 2008 to 13 March 2008). :117–122.. 2008.
Creep of $\alpha$ 2+ $\beta$ Titanium Aluminide Alloys. ISIJ International. 31:1139–1146.. 1991.