Publications
] .
2020. Acquisition of 3D Data for Prediction of Monotonic and Cyclic Properties of Superalloys. Integrated Computational Materials Engineering (ICME): Advancing Computational and Experimental Methods. :1–18.
.
1988. Intermediate temperature creep deformation in CMSX-3 single crystals. Superalloys 1988. :285.
.
2020. Multi-scale Microstructure and Property-Based Statistically Equivalent RVEs for Modeling Nickel-Based Superalloys. Integrated Computational Materials Engineering (ICME): Advancing Computational and Experimental Methods. :55–90.
.
2020. 3D Characterization of the Columnar-to-Equiaxed Transition in Additively Manufactured Inconel 718. Superalloys 2020.
.
2021. 3D Characterization of the Columnar-to-Equiaxed Transition in Additively Manufactured Inconel 718..
.
2000. Carbides and grain defect formation in directionally solidified nickel-base superalloys. Advanced Technologies for Superalloy Affordability as held at the 2000 TMS Annual Meeting. :2000.
.
2008. A comparative examination of aging and creep behavior of die-cast MRI230D and AXJ530. Symposium on Magnesium Technology 2008 (TMS 9 March 2008 to 13 March 2008). :117–122.
.
2007. COMPRESSION CREEP BEHAVIOR OF B 2 AL-NI-RU TERNARY ALLOYS. Advanced Intermetallic-Based Alloys(MRS Symposium Proceedings Series Volume 980). 980:45–50.
.
2006. Compression Creep Behavior of B2 AL-Ni-Ru Ternary Alloys. MRS Proceedings. 980:0980–II01.
.
2020. Creep, Fatigue, and Oxidation Interactions During High and Very High Cycle Fatigue at Elevated Temperature of Nickel-Based Single Crystal Superalloys. Superalloys 2020.
.
2003. Defect reduction in large superalloy castings by liquid-tin assisted solidification.. PARSONS 2003: Sixth International Charles Parsons Turbine Conference. :649–661.
.
1995. DEFORMATION OF NiAl-BASED INTERMETALLICS. Micromechanics of Advanced Materials: A Symposium in Honor of Professor James CM Li's 70th Birthday: Proceedings of a Symposium. :205.
.
2004. Development of ultrasonic fatigue for rapid, high temperature fatigue studies in turbine engine materials. 10th International Symposium on Superalloys, Champion, PA, September. :19–23.
.
1996. Dislocation substructure in NiAl single crystals deformed at ambient temperature. MRS Proceedings. 460:493.
.
2001. DYNAMIC DEFORMATION AND DAMAGE IN CAST Y-TIAL DURING TAYLOR CYLINDER IMPACT: EXPERIMENTS AND MODEL VALIDATION. Structural Intermetallics, 2001: ISSI: Proceedings of the Third International Symposium on Structural Intermetallics. 1:269.
.
2006. Dynamics of Ultrafast Laser Induced Damage in Single Crystal Ni-Based Superalloy During Machining. MRS Proceedings. 980:0980–II05.
.
2007. Dynamics of Ultrafast Laser Induced Damage in Single Crystal Ni-Based Superalloy During Machining. Advanced Intermetallic-Based Alloys(MRS Symposium Proceedings Series Volume 980). 980:571–576.
.
2010. Elemental partitioning and microstructure of Mg-Al-Ca-Sn quaternary alloys. TMS 2010: Aluminium and Magnesium (TMS 14 February 2010 to 18 February 2010). :1–5.
.
2012. A First Principles Study of the Effect of Ti and Ta on the SFE of the registered' Phase of Co-based Superalloys. AIP Conference Proceedings.
.
2009. HEAT EXTRACTION AND DENDRITIC GROWTH IN THE LIQUID-METAL-COOLING (LMC) DIRECTIONAL-SOLIDIFICATION PROCESS. International Symposium on Liquid Metal Processing and Casting (LMPC 2009).
.
2007. High Temperature Strength of Co-based gamma/gamma' Superalloys. Advanced Intermetallic-Based Alloys(MRS Symposium Proceedings Series Volume 980). 980:499–504.
.
2006. High Temperature Strength of Co-based $\gamma$/$\gamma$'Superalloys. MRS Proceedings. 980:0980–II08.
.
2007. Influence of Ru and Cr on the heat-treated microstructure of Ni-based superalloys. Materials science forum. 546:1207–1210.
.
2008. Intermetallic Bond Coats: Systems Compatibility and Platinum-Group Metal Additions. MRS Proceedings. 1128:1128–U06.
.
1993. The kinetics of low temperature deformation in NiAl single crystals. Proc first int symp struct intermet, TMS, Warrendale, PA. :591–599.