Publications
.
2014. Effective Hf-Pd Co-doped $\beta$-NiAl (Cr) coatings for single-crystal superalloys. Acta Materialia. 76:449–462.
.
2007. Effect of Sr additions on the microstructure and strength of a Mg-Al-Ca ternary alloy. Metallurgical and Materials Transactions A. 38:420–427.
.
2014. The effect of processing conditions on heat transfer during directional solidification via the Bridgman and liquid metal cooling processes. Metallurgical and materials transactions A. 45:411–425.
.
2014. Effect of Microstructure on Deformation and Fracture of Thixomolded and Thermomechanically Processed AZ61. Magnesium Technology 2014. :161–166.
.
2001. On the effect of low and high pressure hydrogen charging on the oxidation of a Ti–48Al–2Cr–2Nb alloy. Materials Science and Engineering: A. 318:224–234.
.
1994. The effect of impurity content on thermally activated deformation in NiAl single crystals. Scripta metallurgica et materialia. 31:397–402.
.
2004. Effect of Boron Concentration on Fatigue Crack Propagation Resistance and Low Cycle Fatigue Properties of Inconel 718, Superalloys 2004, KA Green, H. Harada, TE Howson, TM Pollock, RC Reed, JJ Schirra, and S. Walston, Ed., TMS, Warrendale, PA. :275–281.
.
2013. The effect of aging on the relaxation of residual stress in cast aluminum. Metallurgical and Materials Transactions A. 44:4809–4818.
.
2013. EBSD Imaging of Femtosecond Laser Ablated Surfaces Using the TriBeam System. Microscopy and Microanalysis. 19:864–865.
.
1997. Early stages of precipitate rafting in a single crystal Ni Al Mo model alloy investigated by small-angle X-ray scattering and TEM. Acta materialia. 45:1085–1097.
.
2007. Dynamics of Ultrafast Laser Induced Damage in Single Crystal Ni-Based Superalloy During Machining. Advanced Intermetallic-Based Alloys(MRS Symposium Proceedings Series Volume 980). 980:571–576.
.
2006. Dynamics of Ultrafast Laser Induced Damage in Single Crystal Ni-Based Superalloy During Machining. MRS Proceedings. 980:0980–II05.
.
2015. Dynamic response of thin films on substrates subjected to femtosecond laser pulses. Acta Materialia. 84:136–144.
.
2001. DYNAMIC DEFORMATION AND DAMAGE IN CAST Y-TIAL DURING TAYLOR CYLINDER IMPACT: EXPERIMENTS AND MODEL VALIDATION. Structural Intermetallics, 2001: ISSI: Proceedings of the Third International Symposium on Structural Intermetallics. 1:269.
.
2004. Dynamic deformation and damage in cast $\gamma$-TiAl during taylor cylinder impact: Experiments and model validation. Metallurgical and Materials Transactions A. 35:2557–2566.
.
1999. Displacement Mapping During In-Situ Straining In The SEM. MICROSCOPY AND MICROANALYSIS-NEW YORK-. 5:334–335.
.
2002. Dislocations and high-temperature plastic deformation of superalloy single crystals. Dislocations in solids. 11:547–618.
.
2008. Dislocation substructures of three die-cast Mg–Al–Ca-based alloys. Scripta Materialia. 58:914–917.
.
1996. Dislocation substructure in NiAl single crystals deformed at ambient temperature. MRS Proceedings. 460:493.
.
2015. Dislocation injection in strontium titanate by femtosecond laser pulses. Journal of Applied Physics. 118:075901.
.
2019. Dislocation dynamics in a nickel-based superalloy via in-situ transmission scanning electron microscopy. Acta Materialia. 168:152–166.
.
2023. Dislocation cells in additively manufactured metallic alloys characterized by electron backscatter diffraction pattern sharpness. Materials Characterization. 197:112673.
.
2018. Discrete dislocation plasticity analysis of the high-temperature cyclic response of composites. Materials Science and Engineering: A. 712:714–719.
.
2017. Discrete dislocation plasticity analysis of the effect of interfacial diffusion on the creep response of Ni single-crystal superalloys. Acta Materialia. 135:188–200.
.
1997. Discontinuous cellular precipitation in a high-refractory nickel-base superalloy. Metallurgical and Materials Transactions A. 28:2443–2452.

]