Publications
] .
2010. Grain-scale creep processes in Mg–Al–Ca base alloys: Implications for alloy design. Scripta Materialia. 63:692–697.
.
2010. High-Temperature Cyclic Oxidation of Pd/Pt-Modified Nial Bond Coats. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.[np]. 14-18 Feb.
.
2010. In situ characterization of fatigue damage evolution in a cast Al alloy via nonlinear ultrasonic measurements. Acta Materialia. 58:2143–2154.
.
2010. On Mechanical Properties and Microstructures of TTMP Wrought Mg Alloys. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.[np]. 14-18 Feb.
.
2010. Modeling fluid flow in three-dimensional single crystal dendritic structures. Acta Materialia. 58:2864–2875.
.
2010. New Co-based g-g′ high-temperature alloys. JOM. 62:58–63.
.
2010. Partitioning of Solute to the Primary $\alpha$-Mg Phase in Creep-Resistant Mg-Al-Ca–Based Cast Alloys. Metallurgical and Materials Transactions A. 41:2435–2442.
.
2010. Permeability Determination via 3 D Reconstruction of the Mushy Zone of Nickel-Base Single Cyrstals. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.[np]. 14-18 Feb.
.
2010. Pulsed-terahertz reflectometry for health monitoring of ceramic thermal barrier coatings. Optics express. 18:3477–3486.
.
2010. Real Time Synchrotron Radiography of High Temperature High Cycle Fatigue Crack Growth in Single-Crystal Nickel-Base Superalloys. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.[np]. 14-18 Feb.
.
2010. Weight loss with magnesium alloys. Science. 328:986–987.
.
2009. Crystallographic fatigue crack initiation in nickel-based superalloy René 88DT at elevated temperature. Acta Materialia. 57:5964–5974.
.
2009. Femtosecond laser machining of cooling holes in thermal barrier coated CMSX4 superalloy. Journal of Materials Processing Technology. 209:5661–5668.
.
2009. Formation of secondary reaction zone in ruthenium bearing nickel based single crystal superalloys with diffusion aluminide coatings. Materials Science and Technology. 25:300–308.
.
2009. g′ rafting in single crystal blade alloys: a simulation study. Materials Science and Technology. 25:205–212.
.
2009. HEAT EXTRACTION AND DENDRITIC GROWTH IN THE LIQUID-METAL-COOLING (LMC) DIRECTIONAL-SOLIDIFICATION PROCESS. International Symposium on Liquid Metal Processing and Casting (LMPC 2009).
.
2009. A mechanism governing oxidation-assisted low-cycle fatigue of superalloys. Acta Materialia. 57:2969–2983.
.
2009. Microstructural evolution and failure characteristics of a NiCoCrAlY bond coat in “hot spot” cyclic oxidation. Acta Materialia. 57:3885–3894.
.
2009. Nonlinear ultrasonics for in situ damage detection during high frequency fatigue. Journal of Applied Physics. 106:024904.
.
2009. Strengthening mechanisms in polycrystalline multimodal nickel-base superalloys. Metallurgical and Materials Transactions A. 40:1588–1603.
.
2009. Structural stability of platinum-group-metal-modified $\gamma$+ $\gamma$′ Ni-base alloys. Metallurgical and Materials Transactions A. 40:1529–1540.
.
2009. STRUCTURE REFINEMENT BY A LIQUID METAL COOLING DIRECTIONAL SOLIDIFICATION PROCESS FOR SINGLE CRYSTAL NICKEL-BASE SUPERALLOYS. International Symposium on Liquid Metal Processing and Casting 2009 (LMPC 2009).
.
2009. TIME DOMAIN TERAHERTZ NON-DESTRUCTIVE EVALUATION OF AEROTURBINE BLADE THERMAL BARRIER COATINGS. REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION: Proceedings of the 35th Annual Review of Progress in Quantitative Nondestructive Evaluation. 1096:434–439.
.
2008. Approaching non-destructive surface chemical analysis of CMSX-4 superalloy with double-pulsed laser induced breakdown spectroscopy. Spectrochimica Acta Part B: Atomic Spectroscopy. 63:561–565.
.
2008. A comparative examination of aging and creep behavior of die-cast MRI230D and AXJ530. Symposium on Magnesium Technology 2008 (TMS 9 March 2008 to 13 March 2008). :117–122.