@article {1926, title = {Temperature-dependent tensile behavior of the HfNbTaTiZr multi-principal element alloy}, journal = {Acta Materialia}, volume = {245}, year = {2022}, month = {12}, pages = {118618}, doi = {10.1016/j.actamat.2022.118618}, author = {Mills, Leah and Emigh, Megan and Frey, Carolina and Philips, Noah and Murray, Sean and Shin, Jungho and Gianola, Daniel and Pollock, Tresa} } @article {1686, title = {Electron backscattered diffraction using a new monolithic direct detector: High resolution and fast acquisition}, journal = {Ultramicroscopy}, volume = {220}, year = {2021}, pages = {113160}, abstract = {

A monolithic active pixel sensor based direct detector that is optimized for the primary beam energies in scanning electron microscopes is implemented for electron back-scattered diffraction (EBSD) applications. The high detection efficiency of the detector and its large array of pixels allow sensitive and accurate detection of Kikuchi bands arising from primary electron beam excitation energies of 4 keV to 28 keV, with the optimal contrast occurring in the range of 8\–16 keV. The diffraction pattern acquisition speed is substantially improved via a sparse sampling mode, resulting from the acquisition of a reduced number of pixels on the detector. Standard inpainting algorithms are implemented to effectively estimate the information in the skipped regions in the acquired diffraction pattern. For EBSD mapping, an acquisition speed as high as 5988 scan points per second is demonstrated, with a tolerable fraction of indexed points and accuracy. The collective capabilities spanning from high angular resolution EBSD patterns to high speed pattern acquisition are achieved on the same detector, facilitating simultaneous detection modalities that enable a multitude of advanced EBSD applications, including lattice strain mapping, structural refinement, low-dose characterization, 3D-EBSD and dynamic in situ EBSD.

}, keywords = {Direct detection, EBSD, Indexing, Inpainting, SEM, Sparse sampling}, issn = {18792723}, doi = {10.1016/j.ultramic.2020.113160}, url = {https://doi.org/10.1016/j.ultramic.2020.113160}, author = {Wang, Fulin and Echlin, Mclean P. and Taylor, Aidan A. and Shin, Jungho and Bammes, Benjamin and Levin, Barnaby D.A. and De Graef, Marc and Pollock, Tresa M. and Gianola, Daniel S.} } @article {1691, title = {Multiplicity of dislocation pathways in a refractory multiprincipal element alloy}, journal = {Science}, volume = {370}, year = {2020}, pages = {95{\textendash}101}, abstract = {

Refractory multiprincipal element alloys (MPEAs) are promising materials to meet the demands of aggressive structural applications, yet require fundamentally different avenues for accommodating plastic deformation in the body-centered cubic (bcc) variants of these alloys. We show a desirable combination of homogeneous plastic deformability and strength in the bcc MPEA MoNbTi, enabled by the rugged atomic environment through which dislocations must navigate. Our observations of dislocation motion and atomistic calculations unveil the unexpected dominance of nonscrew character dislocations and numerous slip planes for dislocation glide. This behavior lends credence to theories that explain the exceptional high temperature strength of similar alloys. Our results advance a defect-aware perspective to alloy design strategies for materials capable of performance across the temperature spectrum.

}, issn = {10959203}, doi = {10.1126/science.aba3722}, author = {Wang, Fulin and Balbus, Glenn H. and Xu, Shuozhi and Su, Yanqing and Shin, Jungho and Rottmann, Paul F. and Knipling, Keith E. and Stinville, Jean Charles and Mills, Leah H. and Senkov, Oleg N. and Beyerlein, Irene J. and Pollock, Tresa M. and Gianola, Daniel S.} } @article {1356, title = {Dislocation dynamics in a nickel-based superalloy via in-situ transmission scanning electron microscopy}, journal = {Acta Materialia}, volume = {168}, year = {2019}, pages = {152{\textendash}166}, abstract = {

Micro-tensile specimens of nickel-based superalloy oligocrystals were tested in-situ in an scanning electron microscope in transmission mode (TSEM) enabling observation of dislocations. The dynamics of dislocation motion during tensile loading were captured and correlated with the measured intermittencies during plastic flow recorded by high load- and temporal-resolution sensors. This investigation in particular focused on the dislocation behavior near twin boundaries with different slip configurations. A multiplicity of deformation mechanisms at the dislocation scale were observed within individual slip bands, including precipitate shearing, dislocation decorrelation and antiphase boundary-coupled shearing. These processes affect strain localization near twin boundaries and provide new defect-level insights on plastic localization and fatigue crack initiation in these alloys.

}, keywords = {Dislocations dynamic, In-situ transmission scanning electron microscopy (TSEM), Nickel-based superalloy ren{\'e} 88DT, Plastic localization, STEM detector, Twin boundary}, issn = {13596454}, doi = {10.1016/j.actamat.2018.12.061}, url = {https://doi.org/10.1016/j.actamat.2018.12.061}, author = {Stinville, J. C. and Yao, Eric R. and Callahan, Patrick G. and Shin, Jungho and Wang, Fulin and Echlin, Mclean P. and Pollock, Tresa M. and Gianola, Daniel S.} }